Geotube Installation || Geotube construction || Geo Bag || geo bag revetments || geo bag embankment

#geotube
#geobag
#geotubeinstallation
The geotube installation process involves three steps: Filling, Dewatering, and Consolidation.
Step 1: Filling. During the filling stage, the dredged material is pumped into the Geotube container. ...
Step 2: Dewatering. ...
Step 3: Consolidation.
A geotextile tube is a large, tube-shaped bag made of porous, weather-resistant geotextile and filled with sediment, such as sand or slurry, to form an artificial dune or levee. Geotextile tubes are a component of the living shorelines approach to coastal management
What is the use of geotube?
The Geotubes are also known as geobags — used for sludge dewatering projects of different sizes because of their simplicity and low-cost factor. They are containers that are hydraulically filled with a slurry mix of sand and water.
What is geotube made of?
Geotubes are made from permeable, soil-tight geotextiles that are filled with dredged soil. The performance of pilot scale field tests using a geotube is presented. The geotube was made from a woven geotextile. It was filled by hydraulically pumping dredged silty clay material into it
What is geotube dewatering?
Geotube® dewatering containers are prefabricated using high strength and quality seaming techniques into tubular, bag-like, or other forms with filling ports or other provisions for site filling. The containers are custom sized to save land space and are ideal for areas where space is a constraint.
How do geotextile tubes work?
Geotextile tubes are large bags made of permeable woven geotextiles, which are stronger than standard sand bags. ... Geotextile tubes work for shoreline protection and erosion control by acting as a permanent or temporary containment structure. Geotextile tubes can also be used to create seawalls, or sand dune cores.
What is geotube project?
Image result
Geotubes are tubes made of natural or synthetic polymers. These are filled with sand dredged from the sea after filtering it off mud. The tubes are 25 meters in length and 4.5 metres wide. One unit of such a seawall would be about 6 feet tall and 9 meter wide, and is supposed to prevent water from entering houses

What are geotextiles made out of?
A Geotextile is permeable fabrics that can filter, separate, reinforce, drain, or protect the soil. These kinds of fabrics are usually made from polyester or polypropylene and typically made in three forms; woven, needle punched, and heat bonded.
How long will geotextile last?
Geotextiles made of 100% polypropylene are inert in most soil types. Once installed, most textiles can last over 25 years