RC Drift Build PART 1 Prep and Paint Tamiya Toyota AE86 Trueno Model | Function and Form Suspension

This is a quick recap video of my first time building a RC Drift Car from Pandora AE86 Trueno Body.

Tools I recommend using for first time build:
1. X-Acto Knife - I would recommend using a new blade the plastic is pretty thick and a dull blade can be dangerous to use.

2. Painters Masking Tap - The Body does come with masking stickers but they are very sticky and hard to apply correctly. I would put masking tape on then cut out the edges with your X-Acto Knife to get a nice paint line.

3. Paint- I used Tamiya Spray Paint (TS26 - white, and TS-6 Matte Black) you will need minimum 2 Spray cans to fill in the body I would recommend getting 3 (the third to use to clean up any mistakes.)

4. Model Nipper Cutter - You dont need this tool but I recommend to be able to cut around the fenders and clean up the plastic cuts

Stay tuned for Part Two, I assemble the Body and Wheels

Check out our other products at ▶︎
https://www.f2suspension.com/

Subscribe ▶︎
https://www.youtube.com/c/FunctionFor...

If you have any questions about our products please contact us at:
[email protected]

and follow us at:
INSTAGRAM:   / functionand.  .
FACEBOOK:   / functionandf.  .

Song - F2F by BLKFLEECE
Thank you!