Just £6 delivered - 4 Channel RC Receiver FS2A FHDS2A - How to Assemble, Solder and to Bind

FS2A 4CH AFHDS 2A Mini Compatible Receiver PWM Output IS JUST £3.66 plus delivery, say £6, but you have to solder on the connector. Here's how to do it and how to bind it to the Flysky i6 i6X i6S / FS-i6 FS-i6X FS-i6S Transmitter.
At 01:57 I say hold down rx button , as you can see on my video it was the tx button at that point! Typo error.
I use a old 25w Antex XS25 but smaller might be better. I've been soldering for years but still find these a little bit tricky. Make sure you put the pins through the way I show , if you solder the other side there's more chance of damaging some very small components, and it will destroy it!
00:00 Introduction 00:08 Assembling and soldering 00:49 Fitting heat shrink 01:28 Binding
Music: YouTube Audio Library.
FS2A rx
Description:
Item Name: Flysky FS2A 4CH Receiver
Channels: 4CH
Output Signal: PWM
Frequency Range: 2.408-2.475GHZ
Width: 135
Receiver Sensitivity: -92DBM
2.4G Mode: AFHDS 2A
Failfe: Yes
Supply Voltage: 3.3-10V
Distance: 400+ Meters
Working Current: 20MA
Size: 11*25MM
Weight: 0.9g
Support: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other AFHDS 2A protocol transmitters
https://www.aliexpress.com/item/10050...