Advanced Inner Barrel Stabilizing O-Ring for: Maxx Model Rotary Chamber (New Gen. All) by Airtech

Product Description
The Advanced locking ring is designed to replace the current Maxx O-ring (Normally brass) ring at the end of setting up the hop unit, however, with the original, there is a tendency for a wobbly gap in between the components which would tilt the barrel at an angle.

Everything Must be Locked-down
Once the new stabilizing ring is installed, it will ensure a snug fit to restrict the motion of the barrel that is inside the hop-up chamber. It will secure the inner barrel and maintain itself steadily locked in the true horizontal position. Even when shots are fired, which is the moment where there is the most stress and vibration at the hop-up, the O-ring will ensure the structure is intact.

This in turn will create a dependable system for the BB to travel down the barrel undisturbed for the most consistent and accurate shots.

Core Benefits After Install
Increase shooting accuracy and consistency.
Eliminated moving factor between the inner barrel and hop-up unit.
Strong polymer fiber glass construction -eliminate any shrinkage and expansion compared to standard brass rings cause by weather temperature.
Compatible for all New Gen Maxx Model Hop-up Chambers including:
✔ M4A
✔ M4E & M4Ei
✔ M4G & M4Gi
✔ M4i
✔ M4P
✔ M4W
✔ MGW
✔ MXW

Main Website
www.airtechstudios.com

Product Page
https://www.airtechstudios.com/produc...

Full Maxx Upgrades Bundle Kit
https://www.airtechstudios.com/produc...