Roofing - How To Install 10 inch Exhaust Vent Asphalt Shingles

Installing a gooseneck roofing vent in 3 tab asphalt roof shingles is a process that can be repeated over and over. Installing a roofing stove vent in 3 tab and dimensional shingles will be the same. The difference is that 3 tabs can be racked straight up and is usually a little easier as it only involves one pass. Installing a roofing vent in dimensional shingles may involve 2 passes depending on the slope of the stairstep when laying. The process is the same.

I like to install the roofing vents, all types over the row of shingles where the vent will cover the nails. I have seen many others install vents as soon as the flange will go on top of the shingle. This may work, but I have seen problems with it in our area. It does not mean it won't last, but I have to err on the side that works here. We deal with a lot more rain and wind than cold weather and that has a lot to do with the methods I use.

Some of the other videos in the Mockup Series that may be helpful:

Roofing - Installing Tarpaper Felt - The Basics - Dry in of Mockup HD
   • Roofing - Installing Tarpaper Felt - ...  

Roofing - Dripedge Install Walkthrough
   • Roofing - Dripedge Installation Walkt...  

Asphalt Shingle Panel Layout Basics - Popping Lines
   • Asphalt Shingle Panel Layout Basics -...  

Asphalt Shingle Panel Layout - Vertical Lines for 3-tabs
   • Asphalt Shingle Panel Layout - Vertic...  

Roofing - How to Install Asphalt Shingles - Getting Started Walkthrough
   • Roofing - How to Install Asphalt Shin...  


SUBSCRIBE TO:
Practical Roofing Concepts YouTube Channel
   / @practicalroofingconcepts