How to Replace the Timing Belt & Everything Else Involved on a 1999 Toyota Camry

I would highly recommend AGAINST the average DIY mechanics trying to do this job alone (maybe with a little help from someone that knows more would definitely make this easier). This video is more intended as a video guide for someone with more than average knowledge about cars doing this for the first time. If you feel confident enough to go at it alone my advice would be to make sure you remember which parts and nuts & bolts go where, to take things one step at a time, and thoroughly watch this easy to follow step-by-step guide on how to change the Timing Belt, Water Pump, Cam & Crank Seals, Oil Pump Shaft Seal & O-Ring, External Belts, Thermostat, and Upper Radiator Hoses on your car! If you have any questions, drop them in the comments below and I’ll get back to you when I can.

Tools Used:
-Pry bar.
-Hood prop.
-1/2in pipe (used as extension).
-1/2in impact gun.
-1/2in ratchet.
-36mm socket.
-19mm socket.
-3/8in impact gun.
-3/8in ratchet (power).
-3/8in ratchet.
-3/8in extension.
-Two different lengths of 14mm sockets.
-Two different lengths of 12mm sockets.
-10mm socket.
-1/4in ratchet (power).
-1/4in ratchet.
-Two different lengths of 1/4in extensions.
-Three different lengths of 10mm sockets.
-10mm swivel socket.
-8mm socket.
-Carter pin puller.
-Pick.
-Air gun.
-Spray adhesive.
-Brake clean.
-Silicone spray.
Anti seize.
-White grease.
-Silicone lubricant.
-Black (electrical) tape.
-Rubber mallet.
-3lb sledge hammer.
-Ball peen hammer.
-Two different type punches.
-Two different sizes of flat tip screwdrivers.
-Two different types of 14mm wrenches.
-10mm wrench.
-Crescent wrench.
-Vice grip.
-Harmonic balancer puller.
-Dielectric grease.
-Silicone (gasket maker).
-Flush gun.
-Small clip.
-Airlift tool.

Parts Used:
-Upper radiator hose (NOTE: lower belt is shown in “parts” clip but ultimately not used).
-Power steering pump belt.
-AC alternator belt.
-Timing belt.
-Timing belt tensioner
-Timing belt tensioner spring.
-Lower timing belt pulley.
-Oil pump O-ring.
-Crank seal.
-Cam seal.
-Oil pump shaft seal.
-Thermostat w/ seal.
-Thermostat housing.
-50/50 premixed antifreeze/coolant.

As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!