How to Replace Intake Manifold 2002-2005 Ford Explorer

Buy Now!
New Intake Manifold from 1AAuto.com http://1aau.to/ic/1AEIM00085

This video shows you how to install an intake manifold on your 2002-2005 Ford Explorer. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is added to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.

This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer

Tools you will need:
• Pocket Screwdriver
• 13mm Wrench http://1aau.to/oa/1AXAA00010
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 8mm Socket http://1aau.to/oa/1AXAA00017
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• T25 Driver http://1aau.to/oa/1AXAA00008
• T25 Socket http://1aau.to/oa/1AXAA00008
• T30 Bit http://1aau.to/oa/1AXAA00008
• T30 Driver http://1aau.to/oa/1AXAA00008
• T30 Socket
• Torque Wrench http://1aau.to/oa/1AXAA00044
• 1-1/16 Inch Wrench
• 1-1/8 Inch Wrench
• Cloth Rags http://1aau.to/oa/1AXSS00035
• Hammer http://1aau.to/oa/1AXAA00091
• Pick http://1aau.to/oa/1AXAA00037
• Razor Blade / Gasket Scraper http://1aau.to/oa/1AXAA00280

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.