Скачать или смотреть How to Disinfect Plastic Medical Devices Using ESLOC-G Glutaraldehyde 2.45% Solution : Guide

ESLOC-G : https://amzn.in/d/356GKFv
ESLOC-4 : https://amzn.in/d/dsKl5u3

In medical settings, the disinfection of reusable plastic devices is crucial to prevent cross-contamination and ensure patient safety. One of the most effective high-level disinfectants used for this purpose is ESLOC-G solution. It is renowned for its broad-spectrum antimicrobial properties, making it ideal for disinfecting instruments that cannot withstand high temperatures—especially plastic devices.

In this blog post, we’ll walk you through how to properly disinfect plastic medical devices using ESLOC-G solution, ensuring safety and efficacy.

Why Use ESLOC-G solution for Disinfection?
ESLOC-G solution is a high-level disinfectant widely used in healthcare for instruments such as:

Endoscopes

Respiratory therapy equipment

Catheters

Plastic forceps

Proctoscopes and similar devices

Key Advantages:
Effective against bacteria, viruses, fungi, and spores

Compatible with most medical-grade plastics

Leaves no residue

Can be reused for multiple cycles with proper testing

Step-by-Step Disinfection Guide for Plastic Medical Devices
1. Pre-clean the Devices
Before disinfection, it is essential to clean the device thoroughly to remove organic matter such as blood, pus, or tissue.

Use an enzymatic detergent or mild cleaning solution.

Scrub with a soft brush to reach crevices.

Rinse thoroughly with distilled water.

Tip: Never skip this step. Organic debris can neutralize disinfectants and reduce efficacy.

2. Prepare the Glutaraldehyde Solution
Ensure you're using a ready-to-use ESLOC-G solution, or activate it according to manufacturer instructions if supplied in two parts.

Use in a well-ventilated area.

Wear protective gloves and eyewear.

3. Immerse the Devices Completely
Submerge the cleaned plastic medical instruments fully in the Glutaraldehyde solution.

Ensure all surfaces are in contact with the liquid.

Use a tightly sealed container with a lid to minimize evaporation and fumes.

4. Contact Time
Allow the device to soak for the manufacturer-recommended time:

Minimum 20–30 minutes for high-level disinfection

Up to 10 hours if sterilization is desired

Do not cut short this time, as it can compromise disinfection.

5. Remove and Rinse Thoroughly
Once the contact time is complete:

Remove the instruments using sterile forceps or gloved hands.

Rinse three times with sterile water to remove any chemical residue.

6. Dry and Store
Dry the disinfected devices with sterile gauze or air-dry in a clean area.

Store them in a sterile container or wrap them in autoclave paper if sterility must be maintained.

Safety Tips While Using ESLOC-G solution
Always use it in a ventilated area to avoid inhalation of fumes.

Wear gloves, face masks, and goggles.

Follow local regulations for disposal of used solution.

Test the potency of reused solution regularly with a Glutaraldehyde test strip.

Conclusion
Using ESLOC-G solution to disinfect plastic medical devices ensures a high level of infection control without compromising the integrity of sensitive materials. By following the correct procedure—from cleaning to rinsing—you can safely reuse medical instruments while protecting patients and healthcare staff alike.