How to Replace Front Brakes 1999-2007 Ford Super Duty F-250

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1ABFS00611

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 1998-2008 Ford Super Duty F-250.

• Check here for more videos on the 1998-2008 Ford Super Duty F-250    • Ford Super Duty F-250 1999-2008 1st G...  

This process should be similar on the following vehicles:
1999 Ford F-250 Super Duty
2000 Ford F-250 Super Duty
2001 Ford F-250 Super Duty
2002 Ford F-250 Super Duty
2003 Ford F-250 Super Duty
2004 Ford F-250 Super Duty
2005 Ford F-250 Super Duty
2006 Ford F-250 Super Duty
2007 Ford F-250 Super Duty

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Ratchet Strap
• Wheel Chocks
• Wire Brush http://1aau.to/oa/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Ford Super Duty F-250 1999-2008 1st Generation:    • Ford Super Duty F-250 1999-2008 1st G...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.