Epson SX/BX Waste Ink Fix :: Replacement pads & External waste kit installation instructions

This video is a two part effort that covers both options for resolving the "service required" waste ink error. Part one is the process of changing out the waste ink pads with replacements while Part Two is how to install an external Printer Potty waste ink kit.

As part of this we chose to break out one key bit of the process into a separate video to make it a whole lot clearer and easier to see so if you're looking at installing the Printer Potty external kit then you'll want to watch this too:
   • Tech Tip: Printer Potty - Connecting ...  

=== Video Content ===
00:00 Intro
00:30 Tools
01:49 ** PAD REPLACEMENT [Start] **
02:00 Remove pad holder screw
03:18 Remove pad holder
04:10 Printer orientation
05:00 Remove the pads
05:40 Clean pad holder
06:25 Insert new pads
08:36 Replace pad holder
10:27 ** WASTE TANK INSTALL [Start] **
12:01 Locate waste ink tube
12:23 Prep tube extension
13:21 Expand exit hole
14:01 Connect internal tube
16:15 Connect external tube
17:23 Finishing off
18:10 Waste tank placement
18:21 Reset waste ink counter
18:50 Like, subscribe and thank-you :)


The waste ink solutions shown in this video are available on sale via:
https://printerpotty.com/pad/sx535
https://printerpotty.com/kit/sx535

This video covers more than just the SX535WD shown including the following Epson printer models:
B42WD
BX525WD, BX535WD
BX625FWD, BX630FW, BX635FWD
BX925FWD, BX935FWD
SX525WD, SX535WD
SX620FW

As ever please remember to like this video if you found it useful and if you need to contact us you can email on [email protected]