Saab 9-3NG 2006 Replacing Rear Brake Shield, Bearing and Disc

Tools:
Torx bit set for disc set screw: https://amzn.to/3JzxQaZ
HEX Bit Socket Set for caliper glide bolt: https://amzn.to/42w5O8Z
E Torx set for lower control arm bolt, caliper bracket and swaybar end link bolt.
Tool for pushing brake caliper piston: https://amzn.to/42w5O8Z
Ryobi Impact Wrench: https://amzn.to/42w5O8Z
Electric Ratchet: https://amzn.to/42w5O8Z
Caliper glide pin grease: https://amzn.to/42w5O8Z

Remove Caliper retaining screw.
Remove Caliper retaining spring
Remove Caliper glide bolts (2pins)
Caliper is now loose, put pads and caliper to the side.
Remove caliper bracket (2bolts)
Remove lower control arm bolt, use a jack to compress the spring, then remove bolt and lower control arm.
Remove bolt for swaybar end link and remove/pull to the side.
Unplug ABS connector and remove four bolts holding the wheel bearing.