Build Guide: WPL C14 (C24 & C24-1). Rock Crawler V1⭐️ see description for more tips

In this video and description, you will hopefully find some inspiration or help and guidance through how to modify a WPL C14 Hilux 4x4 RC crawler 🤩 This has been a really satisfying build and I have tried to document it as best possible to be able to share as much as I can... keeping up the RCOCM ethos!

It's upgrades include: Metal portal axles, 59mm Injora Oil Shocks, 70mm Injora Swamp Claws, a 2 speed gearbox and upgraded electronics.

👇👇 Below you will find links to all the products used and any extra hints & tips I could think of relating to this build. In the video, I have highlighted the all the key points to help overcome issues you might find modifying the WPL C14 (C24 and C24-1), using these same modifications. The video is designed so you can easily pause each section to be able to study each step in detail.

Best of luck with your build... remember to take your time, learn as you go but above all... enjoy it! 😍🤘❤️

❤️❤️👉👉 WPL C14 - https://www.wpl-rc.com/collections/c1...
👀 - also check out the C24 here 👉 https://www.wpl-rc.com/collections/c2...
👀 - and the C24-1 here 👉 https://www.wpl-rc.com/collections/c2...

(Affiliate link purchases provide the channel a small commission which goes straight into new content - thanks for your support! 🙏🤎)

⭐⭐ GENERAL TIPS, HINTS AND HELP 👇👇
Don't forget BLUE threadlock for all metal to metal fixing screws - once each element that requires it is adjusted to fit correctly or function properly ⭐⭐ You may want to pull apart the axles, shim the input gear and fix the driveshaft to the input shaft while the axle is in half for a snug fit ⭐⭐ You may feel a shim on the outside is also required for a good fitment of the driveshaft (shims best found on ebay) ⭐⭐ Make sure all axle grub screws are set correct, then tightened with blue threadlock ⭐⭐ Grease all gears with a lithium grease ⭐⭐ When plugging into the receiver, remember - 1 to turn, 2 to burn - meaning channel 1 on the receiver is for the steering servo, channel 2 is the motor connection or that of your ESC (as that has the motor wired to it) ⭐⭐ I have added front LED lights that I had spare, they will fit in to channel 3 of the receiver while still allowing the cover to fit over ⭐⭐ The springs that come with the Injora shocks aren't strong enough for the weight of the modified truck, so I have included a link to the shocks I had spare and used their springs ⭐⭐ I drilled my chassis quite far in on the chassis, I wouldn't go any further so be aware of that ⭐⭐

... and HERE WE GO with the mods!...

👉 Metal Portal Axles -
https://s.click.aliexpress.com/e/_Ey0...
👉 Axle truss (MN version for portal axles!) -
https://s.click.aliexpress.com/e/_EQo...
👉 Suspension links -
https://s.click.aliexpress.com/e/_EHS...
👉 Metal chasis brace and front plate -
https://s.click.aliexpress.com/e/_EJ3...
👉 59mm Injora Oil Shocks- https://s.click.aliexpress.com/e/_EuY...
👉 Cheap shocks just for springs - https://s.click.aliexpress.com/e/_EuX...
👉 21g metal geared servo - https://s.click.aliexpress.com/e/_EHK...
👉 Metal Driveshafts - https://www.wpl-rc.com/products/wpl-r...
👉 WPL (plastic geared) 2 speed 370 motor - https://www.wpl-rc.com/products/dual-...
👉 Motor heightening bracket - https://s.click.aliexpress.com/e/_EJG...
👉 WPL 30A ESC - https://www.wpl-rc.com/products/3s-12...
👉 3s Lipo Batteries - https://s.click.aliexpress.com/e/_Eul...
👉 Dumbo RC X6PM Transmitter and receiver - https://s.click.aliexpress.com/e/_EQo...
👉 Injora 70mm Swamp Claws and 1.3" metal beadlock rims - https://s.click.aliexpress.com/e/_Ez8...
⭐ 5 to 7mm hex adapters (to fit the wheels) 👉 https://s.click.aliexpress.com/e/_Eve...
👉 Handy screw set - https://s.click.aliexpress.com/e/_Ezx...

#rccrawler #proportional #rockcrawler #scalemodel #wplrc #c14 #radiocontrol #rchobby #scalecrawling #trailtruck #howtobuild #rcbuild #rccrawling #rccrawler #rc4x4

Edited by YouCut:https://youcutapp.page.link/BestEditor
Music: Tokyo Cafe
Musician: TVARI
URL:   / vlogmusic