Musikraft Neck #4 detailed and New 1964 Formvar "L" Series Pickups from Q-Pickups in Croatia

In this video, I show you Musikraft neck #4 and the 1964 Formvar "L" Series pickups from Q Pickups in Croatia. I list all of the Musikraft neck specs below. I also detail my next (or actually first full) build using just the hardward from my '57 Reissue Seafoam Green Strat. I felt I could get a lighter body and better finish than what Fender put on my '57 Reissue so I went with a body from MJT. It is a 10-16 week build time so it will be a while before I can try out the 1964 pickups. I'm still deciding on the specs for that neck but it will be close to the other four necks we have gotten so far.

Note: On the grey bottom flats on the 1964 pickups, I just realized that the top bobbin stayed black throughout the years. I never really noticed on my 1966 pickups.

Farees's website; https://farees.com
Q Pickpus; https://qpickups.com/qshop/
Leo Nocentelli at Normans;    • Leo Nocentelli from the Meters stops ...  

CBS® Neck Custom Build
Guitar Neck Build:
Qty: 1, Price: $215.00
Construction Type:
2 Piece Constructed
Orientation:
Reverse for Right Handed Players
Scale Length:
25.5" Standard Fender
Number of Frets:
21
Nut Width:
1.650" (41.9mm)
Nut Slot Style:
1/8" Nut Slot (Standard Fender)
Heel Width and Type:
2-3/16" (55.55mm) Rounded Strat
Truss Rod Type:
Single Acting w/ Vintage Nut adjust @ Heel
59 Truss Option:
Add 59 Truss Option ($50.00)
Shaft Wood:
Rock Maple
Fingerboard Wood:
Flat Sawn Rock Maple
Fingerboard Style:
Slab (Standard Fender)
Fingerboard Radius:
7-1/4"
Fingerboard Edge Style:
Semi Rolled Fingerboard Edges
Tuner Hole Size:
11/32" (Vintage Kluson)
Top Inlay Type:
1/4" Dots (Black)
Side Markers:
Black 2mm
Side Dot Location:
50/50 Split (Finger Board Wood and Shaftwood) ($10.00)
12th Dot Spacing:
Narrow (Modern Style Post 1964)
Fret Size and Type:
7230 Stainless (Vintage Small) ($60.00)
Skunk Stripe Option 2pc:
None
Back Profile Shape and Size:
AYS 84 97 (SRV)
Binding:
NONE
Tuner Install:
Supply and Install Kluson Tuners ($69.00)
Head Stock Veneer:
NONE
Nut Installation:
Install Slotted Bone Nut ($75.00)
Nut String Spacing:
Not Applicable
Finish:
Oil (Tinted) ($70.00)
Fingerboard Finish:
2 pc Maple - Finish entire neck as selected in "FINISH" Category
Neck Mounting Holes:
Drill Neck Mounting Holes Standard Fender Pattern
Graphite Reinforcing Rods:
None
Administrative Up-Charges:
None
Order Change Acknowledgement:
I have read the order change policy
Delivery Confirmation:
No Signature required upon delivery
Comments:
Please keep the nut string spacing the same as my previous three necks when that nut string spacing drop-down option did not exist.
Be sure to install left-handed Kluson tuners.
Please use new extended CBS headstock as per Scott Smith.
Total:
$549.00
1 $549.00
Subtotal: $549.00
Shipping: $26.00 via UPS Ground
Tax: $0.00
Payment method: Credit Card
Total: $575.00