Скачать или смотреть Nutrient BURN! High Pressure Aeroponics Increased Feed Cycle

Still setting up the Air Atomizing Aeroponics ( AAA ) / Fogponics. Initial set up is definitely a learning and humbling experience. Doing everything DIY including making the atomizer nozzle sprayer itself has been educational.

One of the differences between the HPA ( high pressure aeroponics ) and the AAA Aeroponics is the sprayers themselves. In HPA you typically have a set value for flow as a ballpark like 1 gph rating... which is pretty solid if you stay within the recommended pressure range. When you DIY something you really don't know what the flow rate is until you either test it yourself.

One issue I've noticed with my atomizing nozzle is the chamber where the water is stored is lager than what it should be. Every time I make adjustments to the feed cycle I also have to adjust the air pressure to compensate for the water/air ratio.

Since this is originally a soil plant and I'm converting it to a hydroponics system. It's not just a quick transplant and go! lol

I will continue to observe, adjust, and scramble until I get it right. Another thing that is not helping the situation is... I'm one compressor motor down which, is definitely prohibiting my feed cycles. The seller I purchased it from eBay sent me a broken unit. So, as of Monday, I will need to return that one and wait for the unit I ordered from Amazon to arrive.

Again if anyone has any other suggestions about diagnosing the roots let me know!

Thank You!!!!