Radial Tyres Vs Normal (Bias Ply) Tyres - Which Is Better? | Advantages & Disadvantages | Hindi

Описание к видео Radial Tyres Vs Normal (Bias Ply) Tyres - Which Is Better? | Advantages & Disadvantages | Hindi

There are two classifications of tires: radial tires and bias ply tires. The classifications are based on a tire's construction and its features. A radial tyre features transverse radial plies that run perpendicular to the direction of travel. This assures less heat buildup and a softer ride. Moreover, radial tyres are manufactured with the plies laid radially which results in a more flexible tire wall. Bias ply tires are manufactured with the plies laid out diagonally, which causes the walls to not be as flexible.

Tube Vs Tubeless Tyres | Which Tyre Is Better :    • Tube Vs Tubeless Tyres | Which Tyre I...  

Why are tires always black :    • टायर का रंग हमेशा काला क्यों होता हैं...  

STEEL WHEELS vs ALLOY WHEELS :    • STEEL WHEELS vs ALLOY WHEELS | गाड़ी क...  

Wide Tyres VS Skinny Tyres | Which are best for motorcycle :    • Wide Tyres VS Skinny Tyres | Which ar...  

Replace Tube Tyre With Tubeless Tyre :    • क्या बाइक में ट्यूब टायर की जगह ट्यूब...  

Nitrogen vs Air in Tyres :    • Nitrogen vs Air in Tyres : Which is B...  

How Low Tyre Pressure Effects on Your Vehicle :    • How Low Tyre Pressure Effects on Your...  

Tyre Numbers Will Tell The Tyre Manufacturing Date :    • टायर के चार नंबर से जाने टायर कितनी प...  

what does the numbers on a tyre mean? :    • टायर पर लिखे नंबर से क्या-क्या जानकार...  

Radial Tyres:
In radial tyres the steel belts run at a 90-degree angle with the tread line. It allows the sidewall and the tread of the tyre to function independently. Thus, there is low sidewall flex and more contact with the ground.

Bias Ply Tyres:
In bias ply tyres the nylon belts run at 30 to 45-degree angle with the tread line. The multiple, over lapping rubber plies in these tyres connect the sidewall and tread. The stiff internal construction causes less contact with the ground and may result in overheating.

Pros of Radial Tyres:

1. Runs cooler at highway speeds and under load
2. Steel belts provide tougher construction and higher puncture resistance
3. Uniform contact with the ground provides uniform tread wear
4. Wider footprint of these tyres keeps the vehicle stable

Cons of Radial Tyres:

1. Steel belt construction affects the ride quality adversely
2. Curb impacts can cause sidewall damage
3. Harder tread increases tyre noise

Pros of Bias Ply Tyres:

1. Tougher side walls due to the crosshatch construction
2. Smoother ride on rough surfaces
3. Less expensive than radial tyres

Cons of Bias Ply Tyres:

1. Tread wears faster due to higher traction
2. High rolling resistance can affect fuel economy
3. Roll-over effect causes loss of traction while cornering

#Tyres #Radial #Bias

My Moto Vlogging Gears :

1. My Vlogging Camera (GoPro HERO9 Black) : https://amzn.to/2MUeDHq

2. Mic (Kodak M11) : https://amzn.to/3qskRNl

3. Mic (Boya BYM1) : https://amzn.to/3pRxscL

4. Go Pro Accessories (61 in 1 Action Camera Accessories Kit) : https://amzn.to/39IX06d

5. Helmet (Steelbird SBA-1) : https://amzn.to/36GA7OK

6. Helmet (Studds) : https://amzn.to/3cFrBnh

7. SanDisk Extreme uSD Memory Card : https://amzn.to/3oLhMGM

8 . GoPro Hero 9 Media Mod : https://amzn.to/3qrcwts

9. Riding Gloves 1 : https://amzn.to/3gEnmrK

10. Riding Gloves 2 : https://amzn.to/3nf5Wos

11. Riding Face Mask : https://amzn.to/3hcEl4U

12. My Bike :    • Why Did I Buy BMW G 310 R? | BMW G 31...  

My Studio Gears :

1. My Camera (Canon 200D) : https://amzn.to/3qsn0sm

2. Tripod (Digitek) : https://amzn.to/2NAjQUQ

3. Mic (Boya BY M1) : https://amzn.to/3pRxscL

4. Studio Light : https://amzn.to/3aqCzvc

Join my channel and become a member :    / @mechanicaltechhindi  

The wait is finally over. I am here with YouTube's very first Automobile & Mechanical Engineering Channel in HINDI.
In this channel i will upload videos related to automobile and mechanical engineering topics such as engine, I C engine, Cars, Motorcycles, Production, HMT, Thermodynamics, FM, CAD/CAM etc.

So subscribe my channel and learn everyday

Follow me on twitter: ⤵
  / dashingdanish11  

Add me on Facebook: ⤵
  / danish.ali.754  

Follow channel on Instagram: ⤵   / mechanicaltechhindi  

Contact me: ⤵
[email protected]

Комментарии

Информация по комментариям в разработке