Скачать или смотреть 🔵 Home Made LNB Holder For Free FTA Channels French Channels + Multitv | Pbteck

Home Made LNB Holder For Free FTA Channels French Channels + Multitv


Creating a homemade LNB holder to receive Free-to-Air (FTA) French channels and MultiTV involves designing a bracket or support that can securely hold and align multiple LNBs on a single satellite dish. This allows you to receive signals from different satellites simultaneously. Here’s a step-by-step guide:

Materials Needed
**Bracket or Base**: Metal or strong plastic (could be a flat bar, angle iron, or similar material)
**Hose Clamps or Cable Ties**: To secure the LNBs
**Screws and Nuts**: For attaching the bracket
**Drill and Drill Bits**: For making holes
**Measuring Tape or Ruler**: For precise measurements
**Marker or Pencil**: For marking positions
**LNBs**: Suitable for the satellites broadcasting French channels and MultiTV channels
**Satellite Dish**: With a mounting arm

Steps

1. *Design the Bracket:*
Measure the distance between the focal points of the LNBs for the desired satellites. This distance depends on the orbital positions of the satellites you want to receive signals from.
Mark the positions for the LNBs on the bracket. The distance between the LNBs should reflect the difference in the satellite positions in the sky.

2. *Drill Holes in the Bracket:*
Drill holes at the marked positions to attach the LNBs. Ensure the holes are large enough for the hose clamps or cable ties to pass through.

3. *Attach the LNBs to the Bracket:*
Secure the LNBs to the bracket using hose clamps or cable ties. Ensure they are firmly attached but still adjustable for fine-tuning.

4. *Mount the Bracket to the Satellite Dish:*
Attach the bracket to the dish’s mounting arm. Use screws and nuts to secure it in place. Ensure it is stable and can withstand outdoor conditions.
The bracket should allow you to position each LNB at the correct focal point for its corresponding satellite.

5. *Connect the Coaxial Cables:*
Connect coaxial cables from each LNB to a DiSEqC switch if you are using a single receiver, or directly to the respective receivers if using multiple.
Ensure the connections are secure and weatherproof them if necessary.

6. *Align the Satellite Dish:*
Use a satellite signal meter or the signal strength indicators on your satellite receiver to align the dish.
Adjust the dish’s azimuth, elevation, and skew to maximize the signal strength for both satellites.
Fine-tune the position of each LNB on the bracket for optimal reception.

7. *Configure the Satellite Receiver:*
Configure your satellite receiver to recognize the DiSEqC switch (if used) and assign the correct ports to each satellite.
Perform a channel scan to ensure you are receiving the desired FTA French channels and MultiTV channels.

Tips for Optimal Performance
*Weatherproofing:* Use weather-resistant materials and sealants to protect the bracket and connections from the elements.
*Sturdy Construction:* Ensure the bracket is strong and securely fastened to avoid any movement or misalignment due to wind or other factors.
*Precise Alignment:* Take your time to precisely align the dish and LNBs for the best possible signal quality.

Example Design
*Bracket Material:* A piece of flat metal bar or angle iron about 12-18 inches long.
*Holes:* Drill holes every 2-3 inches along the bar for adjustable LNB positioning.
*LNB Attachment:* Use hose clamps to secure the LNBs through the holes, allowing for fine adjustments.

By following these steps and tips, you can create a homemade LNB holder that effectively captures FTA channels from satellites broadcasting French channels and MultiTV channels, ensuring a robust and reliable setup.



_____________________________________
LINKS

Visit The WEBSITE for more Info:

https://www.pbteck.com



INSTAGRAM;

  / pbtecknology  

FACEBOOK;

  / pbtecknology  

TWITTER

  / pbtecknology  




TELEGRAM:

https://t.me/pbtecknology

PBTECKNOLOGY
   / pbtecknology