Скачать или смотреть Brielle explains ElectroStrainer Pro and SeaStrong RDP RunDry Pump at Ft Lauderdale Boat Show

Sales manager Brielle explains the ElectroStrainerPro and our RunDry Pump at the Fort Lauderdale Boat Show #flibs #flibs2025 #electrosea

Video contents:
0'03: ElectroStrainer Pro explained
0'12: Cell of ElectroStrainer Pro
0'17: ClearVis Flow Sensor (monitor flow rate)
0'34: RDP Silver Bullet SeaStrong pump explained
0'42: Why you can run pump DRY up to 60 minutes
1'04: Stainless-steel ring around threading to prevent cracking
1'17: Based in Minnesota

Video transcript:
0’00: Hi, I’m Brielle, sales manager with ElectroSea.
0’03: So starting with our ElectroStrainer Pro, we’re generating a low, precise level of chlorine directly inside of our strainer basket.
0’12: This is the cell right here where the chemical reaction is happening to generate that low, precise level of chlorine.
0’17: From here, we have our ClearVis ultrasonic flow sensor. This is going to give you and your ElectroStrainer Pro a digital readout of your flow rate in real time, so you’re able to monitor your flow to see if you have any blockage inside your strainer.
0’34: From there, were going into our RDP Silver Bullet SeaStrong pump. This is our magnetic drive AC pump.
’42: And what we’re doing with run-dry protect (RDP), is we’re actually able to run the pumps dry with no water – not that we want you to do that, but we know mistakes happen and if a bag gets stuck in your thru hull we’re able to warranty the run-dry feature using proprietary materials.
You can run that pump dry for up to 60 minutes.
1’04: Inside of here, we have a stainless-steel ring around the threading to prevent cracking. We’re using a polypropylene impeller, so no more bronze impellers that get traditionally eaten up and end up inside your system.
1’17: Everything is based in Minnesota and we ship worldwide.