Скачать или смотреть Coil Building 101: How to build coils

A quick time lapse on how to build coils. Zade from Vape Africa shows us how to fit coils into the Geekvape peerless RDTA.

Step one:
Snip the leads to the correct length

Step two:
Fit the leads into the post holes.One lead into the positive terminal and one lead into the negative terminal.

Step three:
Clamp down the coils using the screws in the post holes.
Once the coils are tightly in place proceed to the next step.
Do not worry if your coils are not perfect at this stage.

Step four:
Place a screwdriver or coil jig into the coils and align the coils so that they sit horizontally. Make sure there are no gaps between the wraps of the coils. Repeat for each coil.

Step five:
Once your coils are aligned and in place, dry fire your device to heat the coils. Once the coils are glowing red, you will need to strum out any hot spots - As demonstrated in the video.

Step 6:
Once your coils are burning evenly it's time to let them cool off so that you can fit the cotton.