The Only Guide you Need for Correct 2-Stroke Fuel Mix Ratio!

Combining petrol with a particular kind of oil made for two-stroke engines is known as mixing 2-stroke fuel, or two-cycle oil. Two-stroke engines, which are frequently seen in motorbikes, scooters, and some lawn equipment, depend on this procedure to operate well and last a long time. To guarantee that the engine's moving parts are lubricated, two-stroke engines need the oil to be pre-mixed with the fuel, in contrast to four-stroke engines that have a separate compartment for oil.

Link to Mixing Bottle: Coming soon

Usually defined by the engine manufacturer, the correct fuel-to-oil ratio must be ascertained before mixing 2-stroke gasoline. Typical ratios are 40:1, 32:1, or 50:1, where the number denotes the proportion of petrol to oil. A 50:1 ratio, for instance, calls for 50 parts petrol and 1 part oil. To prevent engine damage, it's critical to follow the specified oil ratio: too little oil might result in inadequate lubrication and engine wear, while too much oil can produce clogging and smoke.

Pour the necessary amount of two-stroke oil into a dry, clean fuel container before beginning to mix the gasoline. Next, pour in the appropriate volume of petrol. It's critical to use new fuel because old fuel can harm engines. To make sure the petrol and oil are thoroughly mixed, close the container after pouring the petrol and shake it briskly for one minute. The fuel is ready for use in your two-stroke engine once it has been blended. Remaining fuel should always be kept dry and refrigerated, with the mix ratio and the mixing date clearly marked on the container. Recall that mixed 2-stroke gasoline deteriorates over time and should not be kept in storage for extended periods of time.

Have a great day

Craig