How to Replace Control Arm 2010-2017 Chevrolet Equinox

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00706

Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2010-2017 Chevrolet Equinox.

This process should be similar on the following vehicles:
2010 Chevrolet Equinox
2011 Chevrolet Equinox
2012 Chevrolet Equinox
2013 Chevrolet Equinox
2014 Chevrolet Equinox
2015 Chevrolet Equinox
2016 Chevrolet Equinox
2017 Chevrolet Equinox

Tools you will need:
• 18mm Wrench
• 21mm wrench
• 15mm Socket http://1aau.to/ob/1AXAA00015
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• Torque Wrench http://1aau.to/oa/1AXAA00044

Please consider subscribing:    / @trq  

Check out our playlist:
Chevy Equinox 2010-2017 2nd Gen:    • Chevy Equinox 2010-2017 2nd Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.