How to set-up your first MTL RTA | Complete tutorial on all you need to know from A-Z!!

I was asked by many vapers who want to upgrade from stock coil to their first MTL RTA to record a tutorial on how to set-up a MTL RTA and the tools necessary. So in this tutorial i recorded the whole process, from what tools you need to start with, right up to the moment you inhale your first vapour out of your new & shiny MTL RTA.
I hope it is helpful.

So here is the list of tools & components you need with a short description of its use.
1) MTL RTA of your choice (I recommend as a first, The Intake MTL RTA by Augvape Or Ares V2 by Innokin)
2) MTL Coils ( I recommend 2.5mm ID. NatureVape Core Clapton 1.0 ohm coil. Or Hellvape MTL dual core Fused Clapton 1.0ohm coil. Or Coilology MTL Fused Clapton 0.8ohm coil.
For a bigger deck the Wotofo 3.0mm ID 0.9 ohm Ni80 Duel Core fused Clapton coils.
3) Coilmaster 521 Mini V2 ( to build your coil on, to dry fire to eliminate hot-spots & to check the final ohms
4) Coil Master Ceramic Tipped Angled Tweezers (to rake the coil when first fired and to fluff or thin the cotton ends if needed)
5) Screw driver (Philips Head Screwdriver & Flat Head Screwdriver (you should receive the right one with the RTA)
6) Hex Screwdriver 1.3 & 1.5mm (needed for some RTA’s. Wera 118064 1.3mm Hex & Wera 118066 Hex 1.5mm)
7) Flush coil wire cutters ( there are many on the market)
8) Cotton. (MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 140pcs (180pcs) or Cotton Labo Organic Japanese muji pads Cotton Puff Size M (200Pc)
9) Good quality Scissors to cut & trim the cotton ( I use pointed edged Fiskars scissors 13cm)

And of course your chosen liquid!! Enjoy the excellent flavour on your new MTL RTA and remember to change your cotton often and to clean your coil so you can enjoy optimum flavour all day & every day!!

Most recommended is The Coilmaster V3 DIY coil kit that includes as follows.
1 x Pair Wire Cutters -1 x Pair Needle Nose Pliers -1 x Pair Folding Scissors -1 x Philips Head Screwdriver -1 x Flat Head Screwdriver -1 x Pair Ceramic Tweezers -1 x Pair Elbow Tweezers - 1 x 521 Mini Tab Coil Tester - 1 x V4 Coil Jig - 1 x T Style Hex Screwdriver - 3 x Sheets Japanese Organic Cotton