How To Load Metal Coil On An NTM Roof Panel Machine

How do you load metal coil onto a New Tech Machinery roof panel rollforming machine?

**********************************

Loading coil onto your NTM roof panel machine's overhead reel rack is a simple process using the expandable arbor. In this video, Bryan Yancy from the New Tech Machinery Service department demonstrates how to operate the expandable arbor, line up the coil according to the profile in the machine, and load it onto the machine. If by chance we didn't answer your question in this video, you can contact us here: https://hubs.ly/H0f817Z0

**********************************

FOLLOW THE NEW TECH MACHINERY TEAM
►  / new-tech-machinery  
►  / ntmmazzella  

Visit Our Website: https://hubs.ly/H0f82Sn0
Subscribe To Our Blog: https://hubs.ly/H0f82T00

Machine should never be operated without the guards in place. Otherwise severe injury can occur. Machine must be operated by a competent trained individual and never be operated by a person who has not had proper training, studied the video and the latest operating manual found at www.newtechmachinery.com/resources/machine-manuals. Failure to operate correctly or without guards can result in severe injury.

New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.