Don't Ruin Your Jigsaw Cuts! (Avoid BLADE BENDING + WANDERING with Jigsaws...)

Описание к видео Don't Ruin Your Jigsaw Cuts! (Avoid BLADE BENDING + WANDERING with Jigsaws...)

Learn Power Tools in 1 day! Check Out POWER TOOLS EXPLAINED! Just $97!
https://www.thehonestcarpenter.com/
Use Our Limited-Time 20% Code: HONEST20

Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
https://www.thehonestcarpenter.com/

AFFILIATE TOOL LINKS:
Black + Decker 5-amp Jigsaw (Best Seller!):
https://amzn.to/3EqEHBd
Dewalt 6.5-amp Jigsaw:
https://amzn.to/45G9Axy
Bosch 6-amp Jigsaw:
https://amzn.to/3LcPumF
Black + Decker 20v Cordless Jigsaw:
https://amzn.to/3LdHRvY
Dewalt 20v Cordless Jigsaw (Tool Only):
https://amzn.to/45WmY0m

(Please Note: These are Amazon affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU!)

Don't Ruin Your Jigsaw Cuts! (How To Avoid BLADE BENDING + WANDERING with Jigsaws...)

One of the most common mistakes made during jigsaw usage is BLADE BENDING and BLADE WANDERING.

This is when the jigsaw blade twists or bends in the cut, and thereby produces an angled or beveled edge on a board. This skewed edge often has to be cleaned up, usually with a sander, and even then it is rarely perfect afterwards.

There are several reasons for why jigsaw blade wandering happens:

1) Forcing the Cut Too Hard: You have to slow down your cut pace to prevent stress on the blade.
2) A Dull or Damaged Blade: Blade dullness will also cause stress on the jigsaw blade, which will cause it to twist and wander.
3) Sideways Pressure: Some users will unintentionally drag the tool sideways while negotiating a turn. This can cause the jigsaw blade to bend and wander.
4) Sole Plate Alignment: The jigsaw sole plate has to be at a perfect 90-degrees to the blade. If it is askew, the blade will start cutting at a slight bevel.

Keep these things in mind when you're cutting with a jigsaw, and you'll avoid blade wander!

Thanks for watching!
The Honest Carpenter

Комментарии

Информация по комментариям в разработке