Скачать или смотреть Mikrotik Script 11: Recursive gateway failover script just copy and paste in Hindi & Urdu

Clik or copy the link for downloding Script
https://fb.watch/ho2bM-fual/
   • Mikrotik Script 11: Recursive gateway fail...  
  / hadinetowrk  
====================================
what is recursive routing setting in mikrotik?
Recursive routing occurs when a route (either static or dynamically learned) has a next-hop that is not directly connected to the local router. It is necessary to restrict a set of routes that can be used to look up immediate next-hops.
What is load balancing in mikrotik?
Introduction. Network load balancing is the ability to balance traffic across two or more WAN links without using routing protocols like BGP. Load Balancing's aim is to spread traffic across multiple links to get better link usage. This can be done on one per-packet or per-connection basis.
Failover on Mikrotik Routers is super simple. If you have two routes to the internet, you can make one the primary, and if it goes down fail over to the secondary.
/interface ethernet
set [ find default-name=ether1 ] name=WAN1
set [ find default-name=ether2 ] name=WAN2

/ip pool
add name=ISP1 ranges=192.168.88.2-192.168.88.254
add name=ISP2 ranges=192.168.98.2-192.168.98.254
/ppp profile
set *0 local-address=192.168.88.1 remote-address=ISP1
add local-address=192.168.88.1 name=10Mb-ISP1 only-one=yes rate-limit=10M/10M \
remote-address=ISP1
add local-address=192.168.88.1 name=10Mb-ISP2 only-one=yes rate-limit=10M/10M \
remote-address=ISP2
add local-address=192.168.88.1 name=20Mb-ISP1 only-one=yes rate-limit=20M/20M \
remote-address=ISP1
add local-address=192.168.88.1 name=20Mb-IPS2 only-one=yes rate-limit=20M/20M \
remote-address=ISP2
add local-address=192.168.88.1 name=30Mb-ISP1 only-one=yes rate-limit=30M/30M \
remote-address=ISP1
add local-address=192.168.88.1 name=30Mb-ISP2 only-one=yes rate-limit=30M/30M \
remote-address=ISP2

/interface pppoe-server server
add authentication=pap disabled=no interface=ether5 one-session-per-host=yes \
service-name=service1
/ip address
add address=192.168.10.10/24 interface=WAN1 network=192.168.10.0
add address=192.168.0.183/24 interface=WAN2 network=192.168.0.0
add address=192.168.88.1/24 interface=ether5 network=192.168.88.0
/ip dns
set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4
/ip firewall address-list
add address=192.168.88.2-192.168.88.254 list=ISP1
add address=192.168.98.2-192.168.98.254 list=ISP2
/ip firewall mangle
add action=mark-routing chain=prerouting new-routing-mark=to_ISP1 \
passthrough=yes src-address-list=ISP1
add action=mark-routing chain=prerouting new-routing-mark=to_ISP2 \
passthrough=yes src-address-list=ISP2
/ip firewall nat
add action=masquerade chain=srcnat src-address-list=ISP1
add action=masquerade chain=srcnat src-address-list=ISP2
/ip route
add distance=1 gateway=10.1.1.1 routing-mark=to_ISP1 scope=20
add distance=2 gateway=1.1.1.1 routing-mark=to_ISP1 scope=20 target-scope=20
add distance=1 gateway=1.1.1.1 routing-mark=to_ISP2 scope=20 target-scope=20
add distance=2 gateway=10.1.1.1 routing-mark=to_ISP2
add distance=1 gateway=10.1.1.1
add check-gateway=ping distance=1 dst-address=1.1.1.1/32 gateway=8.8.4.4 \
scope=20 target-scope=20
add distance=1 dst-address=8.8.4.4/32 gateway=192.168.0.1 scope=20 \
target-scope=20
add distance=1 dst-address=8.8.8.8/32 gateway=192.168.10.1 scope=10
add check-gateway=ping distance=1 dst-address=10.1.1.1/32 gateway=8.8.8.8 \
scope=10

/ppp secret
add name=1122 password=1122 profile=20Mb-IPS2 service=pppoe
Recursive Routes in RoS 7.x hadi network
Recursive Routes - MikroTik
Recursive routing for failover
Dual WAN failover using recursive routing
RouterOS 7.5 - failover with recursive routing and PBR
Dual WAN Recursive Failover ROSv7
Related searches
mikrotik dual wan failover recursive
how to setup mikrotik router as failover on two connections
recursive routing example
mikrotik failover configuration
mikrotik dual wan router
mikrotik failover recursive
recursive routing gre tunnel
how to configure auto failover in mikrotik router
Recursive routing on Mikrotik
ROS 6.49.6 How to fix or improve config for Recursive Routing
3 recursive route failover
MikroTik MTCRE - Recursive Routing (Easy Automatic Failover)
MikroTik RouterOS v7 dual DHCP WAN recursive failover w
Recursive routing on Mikrotik

mikrotik dual wan failover recursive
how to setup mikrotik router as failover on two connections
recursive routing example
mikrotik failover configuration
mikrotik dual wan router
mikrotik failover recursive
recursive routing gre tunnel
how to configure auto failover in mikrotik router
Basic ISP Failover with MikroTik.