Скачать или смотреть Automatic Tin Can Wet Cold And Hot Glue Labeling Machine

This is automatic tin can labeling machine , this machine is suitable for metal tin cans such as Paste food tin can , canned fruit tin , beef food tin , cat food can etc.

1. This machine is used for metal tin labeling. The tin rolled into the machine, by the pressure in the tin rolling on the belt drive, when the tin pass through the hot melt adhesive points, can be coated with a hot melt adhesive, along with the moving of tin, the tin part with glue will press the front of the label and stick the label on, and began to be rolled in on the tin. At the same time, the label end was glued by gluing mechanism. With the tin moving on, the label has been affixed to the tin on a roll. Then get out of the machine driven by rolling belt.

2. This machine has alternately label supply mechanism, no need to stop the machine when add label.

3. The end glue supply is controlled by tin. It will not supply glue if without tin.

4. Machines using frequency control can be adjusted according to production requirement.

5. The machine is only to change a few parts for replacing different size tin, the label adhesive only in two ends, with less glue and low cost.

Labeling capacity: 200-500 tins / min (different with the size of tins)
Suitable for tin size, diameter: Φ45-114mm
Suitable for tin height (maximum): 270mm
Label Size Width: 23-254mm
Label Size Length: 117-380mm
Labeling glue: Hot melt glue + Cold Glue
Power : three-phase 380V (or on request)
Electric power: 2.62Kw
Compressed air:2-4Kg/m2, 10 L/ min
Overall dimension: 1855mm × 750mm × 1250mm
Weight: 650Kg

Website: https://www.vkpakfillers.com/
Email: [email protected]