Скачать или смотреть Electromechanical lot system for level control in bulk solids

A sensor weight is electromechanically lowered into the vessel. Once the sensor weight rests on the material, the winding direction of the motor changes and the sensor weight is rewound to the upper stop position. As the weight is lowered, the distance is electronically measured. Microprocessors convert the measured distance together with the programmed silo geometry into a volumetric output signal. This signal is updated each time the sensor weight is lowered.

The Nivobob series of plumb bob sensors is used for continuous level measurement within bulk storage silos and for interface measurement.

The simple electromechanical measurement principle is a truly reliable all-rounder in most bulk materials. The sensor weight, made of a suitable material, attached to either a tape or rope is electromechanically lowered from the top into the vessel. Once the sensor weight rests on the material, the winding direction of the motor changes and the sensor weight is rewound to the upper stop position.

Features of the Nivobob® NBat a glance:
• Suitable for use in most granular and coarse bulk materials
• Threaded or flange mounting.Variety of sensing weights to suit any
application
• Insensitive to dust, material changes, humidity, adhesion, temperature
fluctuation, etc.
• Simple installation and commissioning
• High measurement accuracy even at long range

More product information NB: https://www.uwt.de/en/products/contin...

More to UWT:

LinkedIn:   / uwt-gmbh  
Instagram:   / uwtgroup  
Facebook:   / uwtgroup  
Xing: https://www.xing.com/pages/uwtgmbhlev...
TikTok:   / uwtgroup  
Snapchat:   / uwtgroup  

Website: https://www.uwtgroup.com/