Скачать или смотреть I’ve Made My Best Lightsaber… For A Fourth Time!

Rey Scavenger: Master Chassis #4! I once again was given an opportunity to build the best lightsaber I can currently make, and another opportunity to improve my work! There isn’t much different from the last times, but I made sure to work on improving my wiring efficiency and layout. It seems to have helped make the end result that much cleaner, and eliminated the need for insulating tape on the soundboard. Thank you to my customer who commissioned this piece, and trusted me to do it justice. I hope you like it!

-- TIMESTAMPS --

00:00 - Intro
00:33 - Going Over The Hilt
02:59 - Emitter Petals
05:46 - Blade Retention and Overall Alignment
07:00 - Chassis/Install Overview
15:30 - How The Chassis Works
24:30 - Putting The Chassis In The Hilt
28:37 - With The Blade
35:23 - Outro

-- For The Owner --
Here is all of the info needed to customize the lightsaber, and things to keep in mind about the operations:

DON’T duel with this saber, because the emitter mechanism and petals are fragile. It is meant to be a show piece, and limit to light blade hits to be safe.

Be careful when putting in or removing the blade, keeping the petals in mind.

To put in and take out the chassis, align the two screws at the bottom of the handle with the guide channels on the chassis. Always do it smoothly and gently.

Keep track of the emitter petal mechanism screws, and make sure to tighten them relatively frequently as they get loosened. Use a small screwdriver or sharp tweezers to tighten.

If removing the entire emitter assembly to tighten all the petal screws (as per what is shown in KRSaber’s tips and tricks video) don’t over tighten the screws. That stops the mechanism from functioning smoothly. Tighten until you barely feel resistance, adjust as necessary.

Battery orientation: negative towards the speaker and positive towards the crystal.

SD card is where all the fonts and customization settings are stored, you can access it by just pressing down the card until you hear it click, and then pulling it out of the SD Card slot on the board.

Make sure to use a 90 degree Micro USB


That about covers everything I can think of in terms of how to operate the saber itself, here are some resources to help with customizing and managing your lightsaber. Hope this all helps!

KRSabers Tips and Tricks (Rey Scavenger):
   • 'Tips and Tricks' Guide For Rey Skywalker ...  

Plecterlabs Website:
https://www.plecterlabs.com

CrystalFocus Customization Website:
https://crystalfocus.net

CFX Single Button Quick Interaction Guide (Controls and Such):
https://www.plecterlabs.com/Media/Doc...

CFX Manuals:
https://www.plecterlabs.com/shop/arti...

Firmware Updates:
https://www.plecterlabs.com/shop/arti...

GraFX Tutorial: (You’ll need to adapt it to PIXIES)
   • Crystal focus 10 (CFX) lightsaber GraFx tu...  

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Music in this video is used with the permission of Closed On Sunday:
   / closedonsunday  

Have lightsaber or business inquiries? Hit me up on Instagram or Email me. In the meantime, check out my social medias!

Beacons:
https://beacons.ai/averycastillo

TikTok:
  / averycastillo  

Instagram:
  / official.averycastillo