How to Setup Your Haas Cobot Step by Step - Haas Automation, Inc.

Alex walks us thru programming a complete part setup on the Haas HC10 Cobot.
The Haas HC10 is a fully integrated, plug-and-play, 10kg capacity collaborative robot for Haas machines. The system is controlled entirely by the Haas control when connected to the machine’s electrical interface box.
Our Cobot Kits feature the 6-axis cobot, software interface for direct control through the Haas machine, teach pendant and cobot controller, safety light curtain, and all necessary electrical hardware to interface directly with the Haas control.

Click here to reach the HC10 Cobot Kit webpage: https://www.haascnc.com/haas-tooling/...

Video Chapters:
00:00 Start
00:31 Is your part ready for automation?
00:59 Adjust vise to grip part
01:27 Set Collision Sensitivity
03:16 Cobot Setup Page
05:36 Jogging the Cobot
07:42 Freedriver mode
08:33 Set grippers to clamp material
09:31 Set your “Tool” Frames
11:24 Set your “User” Frames
13:50 Programming: Template
16:04 Programming: Load Part
18:24 Programming: Ready Motion
21:16 Programming: Raw Stock Load Motion
24:00 Programming: Unload Part
25:39 Gripper Swap Motion
27:16 Load After Swap Motion
30:40 Unload Part Motion
33:18 Proofing your program
36:55 Running parts

Don’t miss any Haas videos. Click here: https://www.haascnc.com/about/Newlett...

Need more reasons why you should consider a Haas? Check this out: https://www.haascnc.com/whyhaas.html

If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!

Follow Haas:
Facebook –   / haasautomationinc  
Instagram –   / haas_automation  
Twitter –   / haas_automation  
LinkedIn -   / mycompany  
TikTok -   / haas_automation