Replacing a Range Oven Control Board

This video from Sears PartsDirect shows how to replace an oven control board on a range. The oven control board controls the bake and broil elements, and houses the digital display. If the control board isn't sending power to the heating elements, or if the display isn't working, replace the board using a manufacturer-approved part.

Visit us at:
https://www.searspartsdirect.com?sid=soc:youtube:replacing-a-range-oven-control-board

Or call 1-800-437-1673 to speak with a parts specialist.

The video includes these parts and tools. Look up your model to make sure you get the right parts for your range.
Oven control board
https://www.searspartsdirect.com/part...

Find parts for your Range at:
https://www.searspartsdirect.com/part...

Or, click here to schedule an appointment with a repair technician.
https://www.searshomeservices.com/rep...

Transcript:
The first step is to pull out the range and unplug the power cord. Remove the screws from the control panel back shield and pull the shield off the range. Take a picture of the wires attached to the control board so you can attach them to the new board later. Disconnect all of the wires from the oven control board. Remove the mounting screws and pull the oven control board out of the control panel. If the overlay on your existing oven control board is in good shape, use a putty knife to carefully pry off the existing overlay. Attach the overlay to the new control board—the adhesive residue on the back of the overlay should be enough. Or install a new overlay if you purchased one. Position the electronic oven control board and reinstall the mounting screws. Carefully connect all the wires to the new oven control board. Place the control panel back shield on the back of the control console and fasten it with the mounting screws. Plug the power cord into the outlet. Carefully slide the range into position, ensuring that the rear leveling foot fully connects with the anti-tip bracket.