ERROR LINK FAIL..??? WATCH THIS TO SOLVE THE PROBLEM

So let's talk about my new experiences with the yinghe XP600 large format.

So let's say you run into this error (see photo in post) Well there are three common causes of this problem.

If you use an old model yinghe XP600 LARGE FORMAT MACHINE its basically two.

One likely culprit is the cable the runs from the Driver Board all the way to the carriage board. See that cable. Is what links all the connectors of your machine to the print Job at hand.

In other words, that cable is essentially the link. Which is why the error say link fail.

If you run into this kind. Then the best bet is to change the cable. This is your cheapest route.

The other cause may be the carriage board itself. Because. Unless you have remove the long flex cable in recent past there is no reason to suspect the cable.

Then it just means you have a faulty board in your hands. Often at this point I feel bad because its as sad as it gets but then. Its your board.

The third cause however is for those that use the recent yinghe G series model. It turns out that of you misplace the cables of the printer head e.g if you plug the cable that comes from left side of the board to the right side of the head and vice versa.

Anyways that's it.

For enquiries on how much it costs to replace the board.

You can call.? 08129337940, 08090754326