Скачать или смотреть CCNA 200 301 Chapter 1 Network Fundamentals Lab 003 Configure and Verify IPv6 Link Local addresses

Welcome to our CCNA 200-301 Chapter 1 Network Fundamentals Lab 003! In this lab, we'll dive into the world of IPv6 addressing by configuring and verifying IPv6 link-local addressing and prefix.

Join us as we explore the essential concepts of IPv6 and learn how to ensure seamless connectivity between devices in our network.

Don't miss out on this practical hands-on experience that will help you master the fundamentals of IPv6 addressing.

Like, share, and subscribe to our channel for more CCNA labs and tutorials!

Looking for the full CCNA 200-301 course with all lab files and documents?
This video is part of my free CCNA content on YouTube.
If you’d like all labs, documents, and downloadable resources in one structured course, you can find the full version here on Udemy:
👉 https://www.udemy.com/course/cisco-cc...

Lab Objective:
Configure and verify IPv6 link-local addressing and prefix on Router 1
to ensure connectivity between the PCs connected to each switch and
Router 1. Explore both static and dynamic IPv6 link-local address
configuration options for this topology.


Lab Tasks, Topology, Lab Solution and Packet Tracer (Pre/Post) Labs can be found in the link below:
https://ieverythingeverywhere.com/how...


Equipment Required:
• 2 Switches
• 2 PCs
• 1 Router
• Console cables for Switches and Router
• Ethernet cables for connections between devices
• Computer with Terminal emulation software e.g. PuTTY


IPv6 Address Table:
Router 1 - GigabitEthernet0/0/0 - FE80::1
Router 1 - GigabitEthernet0/0/1 - FE80::202:4AFF:FE6E:2302
--------------
Host 1 - Fa0 - FE80::2
Host 2 - Fa0 - FE80::204:9AFF:FEA6:78E0


Lab Task:
1. Connect the devices according to the provided topology.
2. Connect to the CLI of the router and enable privileged EXEC mode and go
to configuration mode. Configure the appropriate hostname on each device
as per topology shown above.
3. Enable IPv6 Link-Local address on Router 1 interface GigabitEthernet0/0/0
(Manually) which is connected to Switch 1.
4. Enable IPv6 on Router 1 interface GigabitEthernet0/0/1 (Automatically)
which is connected to Switch 2.
5. Verify IPv6 Link Local addressing on Router 1.
6. Save Router Configuration.
7. Enable IPv6 on Host 1 manually as per IPv6 table.
8. Enable IPv6 on Host 2 dynamically and retrieve IPv6 Ips.
9. Verify connectivity between Host 1 and Router 1 via Switch 1.
10. Verify connectivity between Host 2 and Router 1 via Switch 2.
11. Try and ping Host 2 from Host 1, the ping should fail, but why?


Timestamps:
00:05 – Introduction
00:25 - Topology and objectives walkthrough
02:47 - Lab task walkthrough
06:10 - Configuration steps walkthrough
14:50 - Conclusion


Conclusion:
In this lab, we configured and verified IPv6 link-local addressing and prefix on Router 1 Host 1 and Host 2. By ensuring proper addressing and connectivity, we have established communication between the PCs and the router through their respective switches within the LAN segment.

#ccna #network #lab