Headphones recommended.
Here's a video of how to make a steel tongue drum. I love this instrument and wanted to make one for a long time, but it was very hard to get any info about the process. I did some research and made my first steel tongue drum. Hope this helps you guys to make one yourself.
NOTE: CUTTING A (USED) PROPANE TANK IS NEVER A GREAT IDEA, BE AWARE AND CONTACT PROFESSIONALS IF YOU FEEL UNCERTAIN ABOUT ANYTHING! I DO NOT RECOMMEND ANYONE TO GET EXPLODED.
First of all, here are some other good videos which might help:
- • How I built an 11lb Tank (or Hank) drum.
- • how to build a propane tank drum with...
(- I used my tongue sizes from this video)
- • Видео
- • how to build a tank drum by synthikat
The steps of the process are included in the video.
Here are the sizes for the tongues I used:
Low:
C 6,9cm (2 3/4") wide x 11,45cm (4 1/2") long
D 6,9cm (2 3/4") wide x 10,8cm (4 1/4") long
E 6,9cm (2 3/4") wide x 10,16cm (4") long
F 6,9cm (2 3/4") wide x 9,8cm (3 7/8") long
G 6,9cm (2 3/4") wide x 9,5cm (3 3/4") long
A 6,9cm (2 3/4") wide x 8,9cm (3 1/2") long
B 6,9cm (2 3/4") wide x 8,6cm (3 3/8") long
High:
C 5,4cm (2 1/8") wide x 7,6cm (3") long
D 5,4cm (2 1/8") wide x 7,3cm (2 7/8") long
E 5,4cm (2 1/8") wide x 6,9cm (2 3/4") long
F 5,4cm (2 1/8") wide x 6,7cm (2 5/8") long
G 5,4cm (2 1/8") wide x 6cm (2 3/8") long
A 5,4cm (2 1/8") wide x 5,7cm (2 1/4") long
B 5,4cm (2 1/8") wide x 5,4cm (2 1/8") long
I recommend to make the cuts with a rotatory tool first, but then continuing with a hacksaw blade. It is difficult to tune the drum because even the slightest cut will easily tune it too low. If you happen to tune the tongue too low you can either change all the tongues so that they are in a lower key, or you can try to use a file to make the tongue size smaller (as shown in the video).
If you have any questions be sure to ask.
Do also remember to subscribe, and keep on jammin'!
(Shout out to Oulu-opisto for the facilities and help, it was fun.)
Информация по комментариям в разработке