BUILD THIS LOADCELL HANDBRAKE | SIM RACING

Build this USB Loadcell handbrake! This is an extremely easy-to-build DIY sim racing project which will give you a solid product once you're done! So go ahead and give it a bash!

Resources (Cutting Template, Code, Wiring Diagram): https://drive.google.com/drive/folder...

Parts list:
- 3mm Steel waterjet cut template: Found in resources
- 3mm Marine ply inners laser-cut: Found in resources
- Rosejoint/Rod end (1): https://za.rs-online.com/web/p/rod-en...
- M6x60mm (1): These can be found at most hardware stores
- M3x8mm Cap screws (8) - https://za.rs-online.com/web/p/socket...
- Mild steel M3x40mm standoffs (4) -
https://za.rs-online.com/web/p/stando...
- 6mm Aluminium rod (300mm) - https://www.amazon.com/dp/B07KJ71T13/...
- Quick-drying epoxy for the handle and backends
- Some paper clips
- furniture pads - these are found at most hardware stores
- rubber washers - these are found at most hardware stores

Electronics:
- 20kg Load Cell (1): https://www.amazon.com/dp/B096FKK8KS/...
- HX711(1): Included above
- Pro Micro (1): https://www.amazon.com/dp/B07PHK8SMR/...