How to use the LOCTITE CL40 LED Spot Curing System

This instructional video shows users how to operate the LOCTITE CL40 LED Spot Curing Quad Controller; including its features, set up instructions, and several operating modes, options and settings.

Visit Product Page here: http://ms.spr.ly/6059g1aYt

0:00 – CL40 LED Spot Curing System Introduction
0:13 – CL40 LED Spot Curing System Features
0:35 – CL40 LED Spot Curing System Items Supplied
0:59 – CL40 LED Spot Curing System Accessories & Spare Parts
1:38 – CL40 LED Spot Curing System Set Up Instructions
3:06 – CL40 LED Spot Curing System Available Screens Overview
5:06 – CL40 LED Spot Curing System How to Operate
6:40 – CL40 LED Spot Curing System Timer Mode
8:14 – CL40 LED Spot Curing System Timer Mode Link Setting
9:10 – CL40 LED Spot Curing System Advance Mode
13:11 – CL40 LED Spot Curing System Features

The LOCTITE CL40 LED Spot Curing Quad Controller is used to cure UV and Visible light curing adhesives and is designed for UV-LED Spot Curing Light Sources that emit UV light at 365 or 405 nm.

The maximum number of LED heads that can be installed is four (4) units allowing for multiple cure areas. This system is suitable for manual work stations as well as integration into automated production lines. The CL40 LED Quad Controller can be operated in a continuous light output mode or up to a 7-step, programmed output mode where the light output intensity and time mode can be programmed for each separate LED head. The cycle can be initiated with the start/stop button on the front panel, a foot switch (included), or via a PLC connection with an external start signal. This LED Spot Curing System causes no thermal damage or harmful effects to objects being illuminated. Its low power consumption makes it an energy-saving and environmentally friendly light curing system.

LinkedIn: http://ms.spr.ly/6050g1aYQ

#henkeladhesives #LOCTITE #AssemblyAutomation