MIG Welder Review - Eastwood MIG - A Professional Opinion - Eastwood

During the development process of the Eastwood MIG 250, professional welder and instructor Brian K. stopped by Eastwood to test out the machine and offer some additional insight into what pros are looking for in a welder.

Buy Here: http://www.eastwood.com/mig-250.html?...

During the development process of the Eastwood MIG 250, professional welder and instructor Brian K. stopped by Eastwood to test out the machine and offer some additional insight into what pros are looking for in a welder. Eight months later, when the production units arrived, we brought him back to test the unit and hear what he had to say about it. You need to hear what he has to say.

Eastwood MIG 250
Powerful, lightweight 250 amp MIG welder at a DIY friendly price

Eastwood designed this 250 amp MIG welder from the ground up to be powerful, easy to use, and inexpensive. With its state of the art inverter technology, it weighs1/2 as much as similar welders and costs1/2 as much too. But it still delivers all the power you will ever need to weld steel up to a1/2 inch thick and aluminum up to 1/4" thick, with a 60% duty cycle at its full 250 amp setting. Plus, with the efficiency of the inverter and the ability to run on 120v or 240v, you can easily take it to the race track or job site and run it off a generator. It also has infinite adjustability of both its voltage and wire feed speed settings, can take both 4 inch and 8 inch diameter spools, and feed steel, stainless or flux core wire from .023” to .045”. Add the optional spool gun and weld aluminum like a pro too.

120 or 240 volt powered
Infinitely adjustable 30-250 amp welding range
60% duty cycle at 250 amp setting
Weighs just 66 lbs
Torch cable Length 10 feet
Ground cable length 10 feet
State of the art inverter technology
Uses 4 in or 8 in wire spool
Optional spool gun for aluminum wire
3 year warranty

Are YOU an Eastwood Guy?