Logo video2dn
  • Сохранить видео с ютуба
  • Категории
    • Музыка
    • Кино и Анимация
    • Автомобили
    • Животные
    • Спорт
    • Путешествия
    • Игры
    • Люди и Блоги
    • Юмор
    • Развлечения
    • Новости и Политика
    • Howto и Стиль
    • Diy своими руками
    • Образование
    • Наука и Технологии
    • Некоммерческие Организации
  • О сайте

Скачать или смотреть Potentiometers and pico with micropython

  • CodeMade
  • 2024-07-17
  • 12
Potentiometers and pico with micropython
  • ok logo

Скачать Potentiometers and pico with micropython бесплатно в качестве 4к (2к / 1080p)

У нас вы можете скачать бесплатно Potentiometers and pico with micropython или посмотреть видео с ютуба в максимальном доступном качестве.

Для скачивания выберите вариант из формы ниже:

  • Информация по загрузке:

Cкачать музыку Potentiometers and pico with micropython бесплатно в формате MP3:

Если иконки загрузки не отобразились, ПОЖАЛУЙСТА, НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если у вас возникли трудности с загрузкой, пожалуйста, свяжитесь с нами по контактам, указанным в нижней части страницы.
Спасибо за использование сервиса video2dn.com

Описание к видео Potentiometers and pico with micropython

Get Free GPT4o from https://codegive.com
tutorial: potentiometers and pico with micropython

introduction:
potentiometers are variable resistors that can be used to adjust the voltage in a circuit. they are commonly used in electronics for controlling various parameters like volume, brightness, etc. the raspberry pi pico is a microcontroller board that can be programmed using micropython, a beginner-friendly version of the python programming language. in this tutorial, we will learn how to read the value of a potentiometer using the raspberry pi pico and micropython.

requirements:
raspberry pi pico
potentiometer
breadboard and jumper wires
computer with thonny ide installed

steps:
1. connect the potentiometer to the raspberry pi pico as follows:
connect one end of the potentiometer to 3.3v (vcc) pin on the pico.
connect the other end of the potentiometer to gnd (ground) pin on the pico.
connect the middle pin of the potentiometer to an analog input pin on the pico (e.g., pin gp26).

2. open thonny ide on your computer and connect to your raspberry pi pico.

3. write the following micropython code to read the value of the potentiometer:



4. save the code to the raspberry pi pico as `potentiometer_example.py`.

5. run the code on the pico by clicking the "run" button in thonny ide.

6. turn the knob of the potentiometer and observe the values printed on the console. the value will change based on the position of the potentiometer.

explanation:
we import the `machine` module to use the adc (analog-to-digital converter) feature of the raspberry pi pico.
we create an adc object `potentiometer_pin` using pin gp26 as the analog input pin.
in the `while` loop, we continuously read the analog value of the potentiometer using `read_u16()` method.
we print the potentiometer value on the console.

conclusion:
you have successfully learned how to read the value of a potentiometer using the raspberry pi pico and micropython. this basic example can be extended t ...

#python vs micropython vs circuitpython
#python micropython difference
#python micropython 違い
#micropython python library
#python install micropython

python vs micropython vs circuitpython
python micropython difference
python micropython 違い
micropython python library
python install micropython
micropython python unterschied
python micropython
python micropython const
windows python micropython
python to micropython converter
python pivot dataframe
python pico
python picosdk
python picoscope
python pivot
python pivot table
python pivot wide to long
python pivot rows to columns

Комментарии

Информация по комментариям в разработке

Похожие видео

  • О нас
  • Контакты
  • Отказ от ответственности - Disclaimer
  • Условия использования сайта - TOS
  • Политика конфиденциальности

video2dn Copyright © 2023 - 2025

Контакты для правообладателей [email protected]