Скачать или смотреть How to Install Aluminum Roller Shutter Door

Installing Aluminum Roller Shutter Door

Preparation
1. Materials: Special clamps, scrapers, chalk line kit, impact drill, hand drill, electric welder, cutter, screwdriver, hammer, plumb bob, level, etc.
2. Tools: Center column, upper cover, reel, blades, guide rails

Begin Rolling Shutter Installation
1. Determine the location for the rolling shutter door and mark it with plumb bob, level, and other tools to align horizontal and vertical lines.
2. Install the rolling shutter door frame along the marked lines.
3. Install the rolling shutter door according to the instructions and precautions in the manual.
4. Secure the assembled rolling shutter door body, then install the stopper in the correct position and test drive.
5. Install the slide, manual mechanism, and enclosure.

Verify Results
1. Perform commissioning and operation to ensure that all functions and equipment are functioning properly.
2. After everything is installed and checked, the installation of the rolling door is completed and it can be used normally.

https://www.shenghai-alu.com/products...
https://www.shenghai-alu.com/products...

Email: [email protected]