Installing Video of PLUMB Roof Rack Platform for Land Rover 2020+ Defender 110

0:00-04:21 Texture and craft introduction
1.All parts are made of CNC process technology, mechanical splicing design & Carving craft texture.
2.It is made of 5 vertical bars and 2 horizontal bars and some auxiliaries.
3.It is not complicated, just to install the horizontal bars on the car and then slide the vertical bars on two horizontal bars.

04:22-09:25 The installing of vertical bars
1.The module with M-One brand will be installed in the front and with PLUMB brand will be installed in the back.
2.The front of the roof rack is wide and the back is narrow after being installed.
3.The first vertical bar has two base covers, do not make a mistake.
4.Take off the limited locks of the horizontal bars and slide the vertical bars into it.
5.Can screw the bolt to slide or tighten the vertical bars.

09:26-22:26 The installing on the car
1.Take off the shelter plate from the original car and take down the original roof rails.
2.Put the base plate of horizontal bars with sealant first and then install it on the car and tighten it with screw.
3.Be careful of the direction of the bracket, we have marked left and right on it.
4.Lift the roof rack platform onto the car and fix it with screw.
5.Tighten the screw when driving

22:27-24:07 Function of auxiliary parts
The auxiliary parts are used for tension ropes and loading

Item Link: https://www.green4x4.cn/PLUMB-Roof-Ra...

Please feel free to contact us for more information!
Green 4x4 Auto Parts
Email: [email protected]
Website: www.green4x4.cn