Turbo Oil Line Installation and Drilling The Oil Pan | 2Broke2Boosted Ep. 9

Today I installed my turbo's oil feed and oil return lines on 2Broke2Boosted, my budget turbo Miata project. This video is the complete how to guide on how to plum the oil lines for your turbo set up, including how to drill and tap your oil pan for your oil return. This specifically is for an eBay T3/T4 turbo setup, but it will be the same process for basically all turbos. I used a generaic oil line kit from eBay which contained an oil feed line, oil return line, and a bunch of AN fittings to piece everything together. On top of that, I still had to buy a few extra parts. Once again, I could have saved a bit of money by piecing together exactly what I needed rather than buying this generic kit, but it is what it is. This worked fine in the end! This video is also a guide on how to drill and tap your oil pan for your turbo's oil return line.

COMPLETE Build spreadsheet: https://docs.google.com/spreadsheets/...

End Screen Music: 3mbrace - Issues https://spoti.fi/3hpG1b0

*All links are affiliate links, purchasing through them means a small portion of the total cost goes towards supporting the channel, and there's NO additional cost to you!

#TurboBuild #TurboOilLines #TurboMiata For additional content, check out www.cashedoutcars.com!