How To: EFI Error Codes & Reset the ECU on Royal Enfield Himalayan

In this short video I'll show you how to view the EFI error codes stored in your ECU and then reset or clear the ECU for your Royal Enfield Himalayan.

● List of EFI Error Codes

(MIL will glow continuous. Engine will start but not perform to its potential.)

Follow the procedure outlined in the video to cause your Check Engine or MIL light to blink. Watch and count the binking. There will be long blinks and short blinks. Count the sequence and use the list below to know what component is causing errors.

▪ Long 0 Short 6: Throttle position sensor Malfunction
▪ Long 0 Short 9: Manifold Air Pressure sensor Malfunction
▪ Long 1 Short 2: Engine oil temperature sensor Malfunction
▪ Long 1 Short 3: Intake Air temperature sensor Malfunction
▪ Long 1 Short 7: O2/HEGO Sensor Malfunction
▪ Long 4 Short 5: O2 Sensor heater circuit Malfunction
▪ Long 5 Short 4: EXAI Circuit Malfunction

(MIL will glow continuous. Engine will NOT start but will crank)

▪ Long 6 Short 6: Crankshaft position sensor Malfunction
▪ Long 1 Short 5: Roll over sensor Malfunction
▪ Long 3 Short 3: Fuel Injector Circuit Malfunction
▪ Long 3 Short 7: Ignition Coil Circuit Malfunction
▪ Long 4 Short 1: Fuel pump relay circuit Malfunction

Once the problem has been fixed or corrected, follow the procedure outlined in the second half of the video to clear or reset the ECU on your Royal Enfield Himalayan.

● Products on the Bike

▪ $20 ADV Hand Guards: https://amzn.to/2GJeXmn
▪ $20 12v/USB 5v Outlet on Amazon: https://amzn.to/2YtlE6X (Possibly Out of Stock)
▪ $12 12v/USB 5v Outlet on eBay.com (redirect): http://karmakaze.co/ebay-12v-5v-power...
▪ $89 Oxford Heaterz Adventure Grips https://amzn.to/31sZrmq (New Waterproof Connectors)

● Fun Stuff & Support

☺T-Shirts, Mugs & Gifts: cafepress.com/karmakazemoto
♥ Patreon Viewer Support: patreon.com/karmakazemoto