Siraya Blu vs Tenacious vs 50-50% mix

Few months ago, I compared Siraya Blu-Tenacious mix vs ABS materials as 3rd match SLA vs FDM 3D printed bolts and nuts. In this video I would like to test Siraya resins separately and as 50-50% mixture. Used test specimens have same dimensions as those in my previous videos, so results are comparable with each other.
Resin used in the video:
https://siraya.tech/products/tenaciou...
https://siraya.tech/products/blu-by-s...

Results can be downloaded from:
https://www.mytechfun.com/video/108

Other similar material test videos:
https://www.mytechfun.com/videos/stre...

Digital torque wrench (smallest 0.3-30 Nm - not the same, but similar)
https://www.banggood.com/custlink/mD3...

Support my work:
https://www.buymeacoffee.com/mytechfun
  / mytechfun  
https://www.mytechfun.com/donation

Contents:
0:00 Introduction
1:54 Tensile test
3:04 Shear test
4:26 Bending test
5:40 Impact test
7:02 Twist test
9:54 Conclusions

#siraya #sirayablu #sirayatenacious #sla3dprinting