Build an AMAZING kinetic sand art table - Part 2

Описание к видео Build an AMAZING kinetic sand art table - Part 2

I'll show you how to finish building your own kinetic sand art table. We'll add some smart LED lighting & a control panel - set up the software and build an Oak veneered top. I'll then explain how to create your very own drawings... 👇 More info below 👇

Search, collaborate, and share your 3D models with Thangs! Start exploring at: https://bit.ly/3h34OT0

Part 1:    • Build a Sisyphus MAGIC SAND Coffee Ta...  

It is incredibly captivating to be beside this simple DIY wooden table as the steel ball magically carves out an endless and ever changing series of beautiful geometric patterns in the sand.

Support future projects, see DIY Machines' Amazon Wish List: https://www.amazon.co.uk/hz/wishlist/...

Links to the professional sand table - Ampersand:
■ Moving Pieces website: https://movingpieces.studio/

If you’re in the UK I highly recommend Oakdale Crafts as veneer supplier: https://oakdalecrafts.co.uk
I used their European Oak and applied some boiled linseed oil to bring out the grain detail. It looks fantastic.

List of items used in this project and where to find them:

■ 12v Nema 17 stepper motors (x2): https://geni.us/StepperMotor
■ GT2 Timing belt (3m was used in the video): https://geni.us/TimingBelt5m
■ 5mm bore idler, 6mm or 10mm width, 20 teeth (x2): https://geni.us/6mmIdler5mmBoreToothed
■ 5mm bore idler, 6 or 10mm width, toothless (x4): https://geni.us/6mmIdlerWheel5mmBore
■ Elegoo Arduino Uno (x1): https://geni.us/ArduinoUno
■ Nuts, bolts and screws (See list below): https://geni.us/NutsAndBolts
■ M2.5 x 6mm bolts (for securing Raspberry Pi) (x4) - https://geni.us/PiBolt
■ Stepper drivers - TMC2208 (x2): https://geni.us/TMC2208
■ Raspberry Pi (Zero W can cope but I recommend model 3 A+) https://geni.us/RaspberryPiAPlus
■ 10k potentiometers (x2) : https://geni.us/Potentiometers
■ Contact switch (x3): https://geni.us/ContactSwitch
■ Arduino CNC Shield (x1): https://geni.us/ArduinoCNCShield
■ Magnets, I used three x 15x3mm and one countersunk 20x7mm all high strength: https://geni.us/CountersunkMagnet https://geni.us/N52Magnets
■ 30mm 5V Fan (x1): https://geni.us/30mm5vFan
■ Micro SD Card 8Gb or higher for Raspberry Pi (x1) - https://geni.us/Micro-SD
■ Neopixels/WS2812b on a 30 per meter roll. - https://geni.us/5mWS2812B30m
■ 12mm momentary push button (x3): https://geni.us/MomentaryPush12mm
■ Some filament for the printed parts (I used PLA, including the wood infused LumberJake from 3D Jake) - https://www.3djake.com
■ Wiring blocks - five wires (x2) and three wires (x2). I used the Wago 221 series - https://geni.us/Wago221
■ Mini360 Buck Converter (x1): https://geni.us/Mini360
■ Faux leather fabric (enough to cover the surface): https://geni.us/FauxLeather
■ Steel ball - 20mm:
■ Sand (I used around 600g):

To make a table frame which measures roughly 80 x 60cm:
■ 40cm long linear rail with block - MGN12H (x2): https://geni.us/LinearRail400mm
■ 60cm long linear rail with block - MGN12H (x1): https://geni.us/LinearRail600mm
See www.diymachine.co.uk for instructions on how to build a larger or smaller version.
■ Arduino Nano (x1): https://geni.us/ArduinoNanoV3
■ Electrical wire: https://geni.us/22AWGWire
■ 12v power supply - 2A or greater (x1): https://geni.us/12VPowerSupply2A
■ Barrel Connector - Female (x1): https://geni.us/FemalePowerBarrel

■ Pocket hole jig: https://geni.us/PocketHoleJig

Nuts, bolts and screws needed:
■ M5 x 20mm (x6)
■ M3 x 8mm (x18)
■ M3 x 12mm (x19)
■ M3 nuts (x6)
■ M2.5 bolts for Pi (x4)
■ Short wood screws (x45)
■ Optional pocket hole screws (x24)

These are some of my favorite tools I use and recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: https://geni.us/Bosch-Screwdriver

==========

DOWNLOADS:

3D printed parts, code, and wiring diagrams can be found and downloaded from here:
https://www.diymachines.co.uk/kinetic...
3D files on Thangs: https://bit.ly/3h34OT0

DISCORD SERVER:
  / discord  

==========

SAY THANKS AND SUPPORT THE CHANNEL:

Provide continual and dependable support through Patreon:
Support me on Patreon:   / diymachines  

Buy me a coffee to say thanks: https://ko-fi.com/diymachines

INSTAGRAM: https://www.instagram.com/diy_machine...
FACEBOOK:   / diymachines  

==========
List of camera and lighting equipment I use:

■ Sony A7 III: https://geni.us/Sony-Alpha7-III
■ Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
■ Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
■ Aputure MC: https://geni.us/FAPGL
■ RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
■ Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
■ Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip

Disclaimer:
This video is shared for demonstration purposes only.
Raspberry Pi is a trademark of the Raspberry Pi Foundation

Комментарии

Информация по комментариям в разработке