How to Replace Intake Manifold 1998-2012 Ford Crown Victoria

Buy Now!
New Intake Manifold from 1AAuto.com http://1aau.to/ia/1AEIM00012

The intake manifold takes the air let in by the throttle body and evenly distributes it to each cylinder. The manifold may also contain various ports to provide vacuum to other accessories. If a manifold is dirty, cracked, or leaking, engine performance could suffer, or damage could occur. This video shows you how to install a new intake manifold, and the necessary gaskets on your 1998-2012 Ford Crown Victoria.

• Check here for more videos on the 1998-2012 Ford Crown Victoria:    • Ford Crown Victoria 1998-2012 2nd Gen  

This process should be similar on the following vehicles:
1998 Ford Crown Victoria
1999 Ford Crown Victoria
2000 Ford Crown Victoria
2001 Ford Crown Victoria
2002 Ford Crown Victoria
2003 Ford Crown Victoria
2004 Ford Crown Victoria
2005 Ford Crown Victoria
2006 Ford Crown Victoria
2007 Ford Crown Victoria
2008 Ford Crown Victoria
2009 Ford Crown Victoria
2010 Ford Crown Victoria
2011 Ford Crown Victoria

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oaWp/1AXAA00013
• Pocket Screwdriver
• Pry Bar http://1aau.to/oF2/1AXAA00020
• 10mm Socket http://1aau.to/oaFK/1AXAA00017
• 19mm Socket http://1aau.to/oW5/1AXAA00043
• 8mm Socket http://1aau.to/oaFK/1AXAA00017
• Blowtorch
• Fuel Line Disconnect Tool http://1aau.to/ov/1AXAA00041
• Serpentine Belt Tensioner Tool http://1aau.to/obF/1AXAA00019
• Trim Tool Set http://1aau.to/oQL/1AXXX00006
• Vacuum
• Channel-Lock Pliers http://1aau.to/ohM/1AXAA00139
• Needle nose pliers http://1aau.to/owi/1AXAA00051
• Needle nose pliers http://1aau.to/owi/1AXAA00052
• 1/4 Inch Socket http://1aau.to/obp/1AXAA00018
• T20 Socket
• Ratchet http://1aau.to/oa9H/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oaU5/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oafU/1AXAA00044
• 1-1/16 Inch Wrench
• Carburetor Cleaner
• Gloves http://1aau.to/osq/1AXSS00048
• Paper Towels http://1aau.to/ove/1AXSS00035
• Rust Penetrant
• Safety Glasses http://1aau.to/ont/1AXAA00343
• Thread Sealing Tape
• Drain Pan http://1aau.to/osd/1AXAA00320
• Pick http://1aau.to/oA7/1AXAA00037
• Razor Blade / Gasket Scraper http://1aau.to/ogv/1AXAA00280
• Rubber Mallet http://1aau.to/oeB/1AXAA00413

Subscribe:    / @trq  

Check out our playlist:
Ford Crown Victoria 1998-2012 2nd Gen:    • Ford Crown Victoria 1998-2012 2nd Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.