**English below**
Comment gérer plusieurs instruments (Avec Cantabile Performer)?
Charger tous les instruments VST dont on a besoin,dans des "Racks", en bloquant l'entrée MIDI sur "None". Ainsi, les signaux MIDI ne rentrent pas directement dans les "Racks", et aucun son (pour le moment) n'est joué.
Renommer chaque Rack correctement, sinon on deviens fou rapidement.
Assigner si besoin (Et c'est toujours mon cas) les sorties "Rack", dans un "rack" final avec Reverb, EQ,compress etc...
Réfléchir à l'usage (massif dans mon cas) de vos pédales sustain.
Assigner ce dont on a besoin sur les touches claviers dont on souhaite se servir, en utilisant "Midi Routing tables"- Utiliser massivement les "Keyboard Range", "Midi channels", Velocity curve etc...
Créer vos "SUB SESSIONS" en fonction des instruments que vous utilisez pour les mouvements suivants. Exemple : Pour l'intro, j'utilise ARMINATOR,dans les aigus, ensuite, SYNTH1 pour le Brass" . Donc il faut rendre muet SYNTH1 dans "MIDI ROUTING TABLE pour la sub-session "INTRO".
Ensuite dans la SUB-SESSION suivante, c'est l'inverse, il faut bloquer "ARMINATOR" et libérer "SYNTH1", toujours dans " MIDI-Routing tables". Ne jamais rien toucher dans vos rack; c'est le midi routing qui sert de "robinet" pour envoyer les signaux MIDI dans les racks où se trouvent les VST.
Ne pas hésiter à faire & refaire des tests, surtout pour le mix final. Toujours garder à l'esprit, que la richesse d'un son peut aussi provenir d'une superposition de sons - Utiliser des presets proches de ce que vous cherchez, puis les modifier selon.
Noter sur papier les touches assignées (ou utiliser un VST "Texte" http://www.codefn42.com)
Perso, afin de garder le plaisir de jouer, je déconseillerai les petits claviers de moins de 61 touches. Mais c'est personnel.
La finalité, pour moi, c'est de jouer, pas tourner des boutons.
***************************************************
How to manage several instrument (With Cantabile Performer)?
Load all the instruments VST needed, in "Racks", by blocking the incoming MIDI signal to"None". So, the signals do not go directly into "Racks", and no sound (for the moment) is played.
Rename every Rack accordingly, otherwise one become crazy quickly.
Assign if needed (And it is always my case) the exiting "Racks", toward a final "Rack" with Reverb, EQ, compress etc....
Think about the use (massif in my case) of your sustain pedals .
Assign what you need on keyboards which we need, by using "MIDI Routing tables " - Do not hesitate to Use massively "Keyboard Range", " MIDI channels ", Velocity curve etc....
Create your " SUB SESSIONS " according to the instruments which you use for the several movements. Example: for intro, I use ARMINATOR,, then, SYNTH1 for Brass ". Thus it is necessary to mute SYNTH1 in " MIDI ROUTING tables for the sub-session "INTRO".
Then in the following SUB-SESSION, it is the opposite, it is necessary to mute "ARMINATOR" and to free "SYNTH1", always in "MIDI-Routing tables ". Never affect any event (Bypass, etc...) in your VST Racks; it is routing MIDI Routing tables that serves as "faucets" to send the signals NOON(SOUTH) to system stands or is the VST.
Assign what we need on touches keyboards which we need, by using " Noon(South) Routing tables " - to Use massively "Keyboard Range", " Noon(South) channels ", Velocity curve etc....
Do not hesitate to do and to redo tests, especially for the final mix. Always keep in mind, that the lush of a sound can also result from a superimposing of several sounds - Use presets close to what you want, then to modify according to.
Note on paper touches assigned (or use a VST "Text" http://www.codefn42.com)
As for myself, to keep the pleasure to play, I shall dis-advise the small keyboards of less than 61 touches. But it is personal.
The purpose, to me, it is to play keyboard, not tweaking knobs.
Информация по комментариям в разработке