Скачать или смотреть How to wind a flat coil. Как намотать плоскую катушку.

To wind a flat coil, you can follow these steps:

Step 1: Prepare the material for winding, which can be wire, ribbon, or other suitable material.

Step 2: Create a starting point, such as securing the end of the material on one of the edges of the coil.

Step 3: Begin winding the material around the coil, using a rod or other tool to pack the wound material tightly together.

Step 4: Continue winding the material onto the coil, following the flat contour of the coil and trying to keep the wound material tight and even.

Step 5: As you wind the material onto the coil, use a tool to press down on the wound material and ensure a tight bond between the layers.

Step 6: Continue winding the material until you reach the end of the coil or desired winding length.

Step 7: Secure the end of the material onto the coil to prevent the winding from unraveling.

It's important to remember that winding a flat coil may require practice to achieve the right density and evenness of the winding.