清洗喷头（Clean the nozzle）

Описание к видео 清洗喷头（Clean the nozzle）

1、如果手动无法抽取，检查墨水车是否在最右边，吸墨垫是否与打印头贴合
1. If manual extraction is not possible, check whether the ink truck is on the right side and whether the ink absorbing pad is fitted with the print head
2.抽取完成后，不要移动墨水车，让打印头在清洗液中浸泡24小时，再抽一次清洗液，
2. After extraction, do not move the ink cart, let the print head soak in the cleaning solution for 24 hours, and then extract the cleaning solution again,
3，用打印软件再进行清洗3到5次，直到每个管子的清洗液能顺利通过墨管。
3. Use the printing software to clean the ink tube 3 to 5 times until the cleaning solution of each tube can pass through the ink tube smoothly.

Комментарии

Информация по комментариям в разработке

Похожие видео