DIY Korean BBQ Table

I made a DIY wood fired Korean BBQ table that uses a Solo Stove so that no propane or gas is required. The concrete table is made from Quikrete 5000 Concrete mix. I used about 12 of the 50lbs bags. I used 1/2" rebar but wire mesh should also work if you don't have tools to cut steel. The concrete pieces weigh about 140-160 lbs each but I think I will make the next version of the concert table about a foot linger and 6 inches wider. Vinyl baseboard trim is a great low cost flexible material for concrete molds or forms and is available at most Home Depots. I used 3/4" thick melamine for the rest of the formwork.


Tool Sponsors:

Ryobi Jigsaw
https://shopstyle.it/l/bCgAZ

Ryobi Circular Saw
https://shopstyle.it/l/bCgBQ

Ryobi HP drill and Driver
https://shopstyle.it/l/bCgB0

Kreg Pocket-Hole Jig 720PRO
https://www.kregtool.com/shop/pocket-...

Kreg Corner clamps
https://www.kregtool.com/shop/clampin...

Solo stove I used:
https://solostove.com/en-us/p/solo-st...

Follow us on Instagram:   / benjaminuyeda  

For additional projects and information check out our website:
http://www.homemade-modern.com/