How To Install The EZ-Counter In Your MACH II Gutter Machine

Install your EZ-Counter like a pro with this step-by-step guide!

How to install the wireless remote: https://newtechmachinery.com/learning...

Shop NTM gutter machines: https://hubs.li/Q02J4RGC0

Everything you need to know about the Mach II playlist:    • Everything You Need To Know About The...  

**********************************

Get ready to install your EZ-Counter! In this video, Chuck Birch from New Tech Machinery walks you through the step-by-step process, from required tools to wiring and final setup. Learn how to configure the EZ-Counter for precise measurements, set up miters, and navigate its settings for optimal performance on your gutter machine. Watch now to make the most of your new EZ-Counter!

**********************************

Learn more about our products here: https://newtechmachinery.com/learning...

In this video:
0:00 - Teaser
0:08 - Intro
0:19 - Safety first
0:31 - Tools you need
1:00 - Install the encoder
4:00 - Install and connect the wires
7:17 - Wire the control box to EZ-Counter
11:02 - Mount the EZ-Counter
13:00 - EZ-Counter walkthrough
14:55 - Outro

Interested in learning more about a machine? Contact us here: https://hubs.ly/H0f817Z0

**********************************

Video production: Alex Spence
Editing: Alex Spence
On camera: Chuck Burch

**********************************

FOLLOW THE NEW TECH MACHINERY TEAM
►  / new-tech-machinery  
►  / ntmmazzella  
►  / newtechmach  

Visit Our Website: https://hubs.ly/H0f82Sn0
Subscribe To Our Blog: https://hubs.ly/H0f82T00

Machine should never be operated without the guards in place. Otherwise severe injury can occur. Machine must be operated by a competent trained individual and never be operated by a person who has not had proper training, studied the video and the latest operating manual found at www.newtechmachinery.com/resources/machine-manuals. Failure to operate correctly or without guards can result in severe injury.

New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.