Sundown X-12s V.3 on Salt 4K (CHECK OUT MY RECENT VIDS FOR UDPATED VIDS AND MODS)

Описание к видео Sundown X-12s V.3 on Salt 4K (CHECK OUT MY RECENT VIDS FOR UDPATED VIDS AND MODS)

3/31/23 UPDATE🔥: Jump to my latest vid here👀💪🏾🔥:    • 🔥🔥Sundown still Pounds 🔊🙉 #TGIF    Sa...  

1/10/2022 UPDATE: bracing complete. check new demo here and see 👀 the difference 🔊🙉    • Sundown X-12s V.3 on Salt 4K (part 2)...  

1/2/2022 Update: thanks for the comments and views. Im gonna work on bracing the box but the problem is since the the port was built on the bottom theres no way to secure the brace by simple drilling from top and bottom of box. Imma have remove both subs and acrylic and figure a way to drill the brace from inside as well. suggestions are helpful. stay tuned for more flex vids

Running Mechman 240A with XS Power 3400 in front and Cyber 6K in back. All 1/0 Guage with Big 3. 2 Sundown X-12 v.3 wired to 1-Ohm in ported box about 4.3 CF tuned to 32Hz on one Sundown SALT 4K. So far I clamped a max of 1850 Watts with burps between 27-33 Hz. Lowest voltage drops of about 12.0 V while engine running. Has more power to give with some more tweaks. Stay tuned
Upvote on reddit https://www.reddit.com/r/CarAV/commen...

Equipment:
- Sundown Audio X-12 V.3 Subs
- Sundown Audio Salt 4K Amp
- Limitless Limithium Cyber 6K battery (rear)
- XS Power AGM 3400 battery (under hood)
- Mechman 240A high output alternator
- All wires 1/0 GA OFC with Big-3
- SMD Analog volt meter for main AGM batt
- Sundown volt meter for Lithium batt
- NVX 500A dual batt isolator
- All ceramic ANL fuses: 250A alt to main batt, 300A main batt to isolator, 300A isolator to lithium, (2) 200A lithium to amp,

Box specs:
- 3/4" Birch with double baffle and steel rod center brace and a 3/4" Acrylic window
- Height 14.5", Width 39", Depth 23"
- Port 32"x2" tuned to 32Hz

Amp settings/tuning:
- Gain (multi-meter method) set to 63.25V before distortion
- Low pass lowest setting 35Hz
- Subsonic 24Hz
- Bassboost off

i dont own rights to the music

Комментарии

Информация по комментариям в разработке