Скачать или смотреть A Drone That’s Also a TANK (Unstoppable Build!)

This is a quadcopter tank that not only flies but also runs on land. It is completely 3D printed and assembled.
It has a real-time open HD camera that provides real-time footage.
It has track belts for moving in off-road conditions.
This drone is for the hobbyist who likes to make cool stuff.
Do check it out, guys.

Download files, wiring diagram, & parts list at the link below:
https://themechninja.com/product/dron...

Discover real DIY builds at https://themechninja.com/

🔧 Tank Drone – Component List with Buy Links

For Drone System
• Motor ×4 – Racerstar 2500 Kv
🔗 https://themechninja.com/product/race...
• Motor ×4 – DYS Sunfun 2500 Kv
🔗 https://themechninja.com/product/dys-...
• Motor ×4 – Samguk 2500 Kv
🔗 https://themechninja.com/product/dys-...
• Propeller – 6045 Tri blade
🔗 https://themechninja.com/product/6045...
• Propeller – 6042 Tri blade
🔗 https://themechninja.com/product/6042...
• Propeller – 6030 Tri blade folding
🔗 https://themechninja.com/product/f-60...
• Propeller – 5055 Tri blade
🔗 https://themechninja.com/?s=5055+
• Propeller – 5152 Tri blade
🔗 https://themechninja.com/product/5152...
• Propeller – 51466 Tri blade
🔗 https://themechninja.com/product/5146...
• Propeller – 5135 Tri blade folding
🔗 https://themechninja.com/product/f-51...
• ESC ×4 – BLHeli 35A/45A
🔗 https://themechninja.com/product/belh...
• Flight Controller – CUAV NANO 7
🔗 https://themechninja.com/product/cuav...
• Flight Controller – Radiolink Pixhawk
🔗 https://themechninja.com/product/radi...
• Transmitter & Receiver – 10CH FS-i6S
🔗 https://themechninja.com/product/10-c...
• Power Distribution Board – 100A
🔗 https://themechninja.com/product/100-...
• Power Distribution Board – Matek
🔗 https://themechninja.com/product/mate...
• Battery – 4S 3300mAh 60C
🔗 https://themechninja.com/product/4s-3...
• Battery Charger – SkyRC B6 Neo
🔗 https://themechninja.com/product/sky-...
• Battery Charger – Imax B6
🔗 https://themechninja.com/product/i-ma...
• Battery Charger – Imax B3 Pro (2S/3S)
🔗 https://themechninja.com/product/imax...

For Tank System
• Buck Converter – LM2596
🔗 https://themechninja.com/product/buck...
• Gear Motor ×2 – 9V 150 RPM
🔗 https://themechninja.com/product/9-vo...
• Motor Driver – L298N
🔗 https://themechninja.com/product/moto...
• Microcontroller – Arduino Nano
🔗 https://themechninja.com/product/ardu...

Additional Electronics
• Power Module – CUAV 60A
🔗 https://themechninja.com/product/cuav...
• Power Module – Hollybro
🔗 https://themechninja.com/product/holy...
• Power Module – Pixhawk 90A
🔗 https://themechninja.com/product/pixh...
• GPS & Compass – Ublox Neo7
🔗 https://themechninja.com/product/ublo...
• GPS & Compass – CUAV C Compass
🔗 https://themechninja.com/product/cuav...
• Telemetry – 915MHz
🔗 https://themechninja.com/product/915m...

For FPV Transmission
• Video Transmitter – Analog VTx
🔗 https://themechninja.com/product/vtx-...
• Video Receiver – Analog VTx
🔗 https://themechninja.com/product/vtx-...

For OpenHD Ground and Air Unit visit the link below :-
https://themechninja.com/product/dron...

Necessary Accessories
• 3D Printer – 220×220×250 mm build volume
• Nuts & Bolts – M2.5 & M3 (various lengths)
• Tools – Cable zip ties, heat shrink tube, soldering iron

Thank you for watching guys,
Don't forget to subscribe